On Wed, 2007-12-19 at 15:58 -0500, Bob Goodwin wrote: > Rick Stevens wrote: > > On Wed, 2007-12-19 at 14:39 -0500, Bob Goodwin wrote: > >> > >> This is what I see: > >> > >> ls -al /var/spool/squid > >> total 12 > >> drwxr-x--- 2 squid squid 4096 2007-12-19 14:01 . > >> drwxr-xr-x 14 root root 4096 2007-11-17 08:36 > >> > >> Is that ok? > >> > > > > Uh, it should be, but just to be safe, as root: > > > > chmod 755 /var/spool/squid [Did that] > > > > And can you include the line that starts with "cache_dir" from your > > /etc/squid/squid.conf file? > All I see with cache_dir are commented? > > less /etc/squid/squid.conf | grep cache_dir > > # Applies to any cache_dir lines listed below this. > # TAG: cache_dir > # cache_dir Type Directory-Name Fs-specific-data [options] > # You can specify multiple cache_dir lines to spread the > # cache_dir ufs Directory-Name Mbytes L1 L2 [options] > # cache_dir aufs Directory-Name Mbytes L1 L2 [options] > # cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n] > # block-size=n defines the "block size" for COSS cache_dir's. > # leads to a maximum cache_dir size of 512<<24, or 8 GB. Note > # has written some objects to the cache_dir. > # 2 full stripes for object hits. (ie a COSS cache_dir will reject > # read-only, no new objects should be stored to this cache_dir > # the cache_dir lines with the smallest max-size value first and the > # cache_dir ufs /var/spool/squid 100 16 256 <---- UNCOMMENT THIS LINE > # 'cache_dir' directory, but you may specify an alternate > # a representation of the cache_dir name where each / is replaced > # with '.'. This is needed to allow adding/removing cache_dir > # If have more than one 'cache_dir', and %s is not used in the name > # corresponds to the order of the 'cache_dir' lines in this > # configuration file. If you change the order of the 'cache_dir' > # the correct 'cache_dir' entry (unless you manually rename > # better to keep these index files in each 'cache_dir' directory. Oh, yikes! Ok, uncomment the line I marked above and retry the "squid -z" or "service squid restart". Note that the line above will result in a 100MB cache, so make sure the /var filesystem has at least 120MB free. Check free space via the "df -h /var" command. On my system: [root@prophead ~]# df -h /var Filesystem Size Used Avail Use% Mounted on /dev/hda5 4.0G 653M 3.1G 18% /var so I have 3.1G free. ---------------------------------------------------------------------- - Rick Stevens, Principal Engineer rstevens@xxxxxxxxxxxx - - CDN Systems, Internap, Inc. http://www.internap.com - - - - "How does that damned three seashell thing work?" - - - Sylvester Stallone, "Demolition Man" - ---------------------------------------------------------------------- -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
