> > > We put Raid 1 (software) on an IBM server. I installed some software and > made sure everything > worked. Then we realized we needed to set up grub so the machine would > boot from either disk. > So under Linux Rescue we went into grub and did > > device (hd0) /dev/sda > root (hd0,0) > setup (hd0) > > device (hd1) /dev/sdb > root (hd1,0) > setup (hd1) > > But then when we booted, everything failed. I noticed a commone > message "initlog not found" so I looked on another machine and > foiund it under /sbin but not on this one. So I copied it to /sbin and > rebooted. It got a lot farther this time, but then got stuck on not being > able to find a default theme. > > I also noticed that linux rescue puts the linux under /mnt/sysimage > (so /etc is /mnt/sysimage/etc, /home is /mnt/sysimage/home, etc) > but in addition to those there was still a /etc, /home, etc. I suppose > one was the mirrored disk. > > So it sounds like we might not have done something correctly. Anyone > have any idea? We did set up the whole raid system correctly during > Linux installation on a different machine, and then used that > anaconda-ks.cfg > file for this one (removing the "#"'s where the raid stuff was commented > out > in the config file). > Tony, Check out a post I made about 6 months or so ago... https://www.redhat.com/archives/fedora-list/2007-June/msg06369.html I converted a system from a non-raid system to a raid1 system Jeff -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
