Here's a full dump from my purchase order: - Inspiron 9400, Intel Core Duo Processor T2500 (2GHz/667MHz FSB) - 17 inch UltraSharp TrueLife Wide-screen WUXGA, for Inspiron 9400/E1705 - 1GB, DDR2, 667MHz 2 Dimm, for Inspiron 9400/E1705- Intel Integrated Graphics Media Accelerator 950 GM, for Inspiron 9400/E1705
- 60GB 5400RPM SATA Hard Drive for Inspiron 9400/E1705 Attached is my Xorg.0.log file, along with a hardware dump using lshw. __________________________________ Jeremy Nix Senior Application Developer Southwest Financial Services, Ltd. (513) 621-6699 Gilboa Davara wrote:
On Wed, 2007-12-05 at 07:33 -0500, Jeremy Nix wrote:During a recent re-install to Fedora 8, I have found that the 1920x1200 resolution that I had in Fedora 7 has been lost. Even with the 915resolution hack, the resolution still is off. From what I can guess, it looks like 1280x1024 or 1440x900. Has anyone had success achieving this resolution, if so how?I did notice a few peculiarities. First, I was able to get a resolution close to (if not exactly) 1920x1200 after futzing with the screen resolution in the GUI, logging out, logging back in. The couple times I saw the "good" resolution, I had reduced my screen resolution setting, restarted, then updated the screen resolution to 1920x12000 and clicked apply. After the next login, the resolution was back to its reduced version. I also notice that each time I login, the resolution appears to magnify as the fonts/icons are being loaded. The text generally shows up first in a smaller form, and then magnifies as everything is loaded. I don't know whether either of these two points are relevant, but I did find them unusual.My configuration is below.############################################ # System: Inspiron 9400 Intel Integrated Graphics Media Accelerator 950 GM 17in WUXGA screen ############################################ # /etc/X11/xorg.conf: Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Synaptics" "CorePointer" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us+inet" EndSection Section "InputDevice" Identifier "Synaptics" Driver "synaptics" Option "Device" "/dev/input/mice" Option "Protocol" "auto-dev" Option "Emulate3Buttons" "yes" EndSection Section "Device"Identifier "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"Driver "intel" EndSection Section "Screen" Identifier "Screen0"Device "Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" EndSubSection EndSection Section "Module" Load "glx" Load "dri" EndSection Section "DRI" Mode 0666 EndSection ############################################ # /etc/sysconfig/915resolution: RESOLUTION="3c 1920 1200 24"You might want to post your LCD maker and model? Plus, please post your /var/log/Xorg.0.log file. (gzipped) - Gilboa
Attachment:
hardware.tar.gz
Description: GNU Zip compressed data
Attachment:
Xorg.tar.gz
Description: GNU Zip compressed data
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list