On Monday 26 November 2007 00:27, Karl Larsen wrote: > Don Raikes wrote: > > I just installed fedora core 8, and after reboot I discovered I have no > > sound at all. > > > > I get an error when I try: > > aplay /usr/share/sounds/KDE_Startup_new.wav > > > > *** PULSEAUDIO: Unable to connect: Connection refused > > aplay: main:546: audio open error: Connection refused > > > > After searching in google, I found a note that said I should do: > > pulseaudio -vv > > > > The results: > > I: main.c: Found user 'pulse' (UID 499) and group 'pulse' (GID 496). > > W: main.c: Warning: home directory of user 'pulse' is not > > '/var/run/pulse', ignoring. I: main.c: Successfully dropped root > > privileges. > > I: main.c: Page size is 4096 bytes > > I: main.c: Fresh high-resolution timers available! Bon appetit! > > D: cli-command.c: Checking for existance of > > '/usr/lib/pulse-0.9/modules//module-hal-detect.so': success I: > > module-hal-detect.c: Trying capability alsa > > D: module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/computer_alsa_timer D: module-hal-detect.c: > > Not loaded device /org/freedesktop/Hal/devices/computer_alsa_sequencer D: > > module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/pci_8086_2668_alsa_capture_2 D: > > module-hal-detect.c: Loading module-alsa-sink with arguments 'device=hw:0 > > sink_name=alsa_output.pci_8086_2668_alsa_playback_0' ALSA lib > > pcm_hw.c:1207:(_snd_pcm_hw_open) Invalid value for card E: > > module-alsa-sink.c: Error opening PCM device hw:0: No such device E: > > module.c: Failed to load module "module-alsa-sink" (argument: > > "device=hw:0 sink_name=alsa_output.pci_8086_2668_alsa_playback_0"): > > initialization failed. D: module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/pci_8086_2668_alsa_playback_0 D: > > module-hal-detect.c: Loading module-alsa-source with arguments > > 'device=hw:0 source_name=alsa_input.pci_8086_2668_alsa_capture_0' ALSA > > lib pcm_hw.c:1207:(_snd_pcm_hw_open) Invalid value for card E: > > module-alsa-source.c: Error opening PCM device hw:0: No such device E: > > module.c: Failed to load module "module-alsa-source" (argument: > > "device=hw:0 source_name=alsa_input.pci_8086_2668_alsa_capture_0"): > > initialization failed. D: module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/pci_8086_2668_alsa_capture_0 D: > > module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/pci_8086_2668_alsa_hw_specific_2 D: > > module-hal-detect.c: Not loaded device > > /org/freedesktop/Hal/devices/pci_8086_2668_alsa_control__1 I: > > module-hal-detect.c: Loaded 0 modules. > > I: module.c: Loaded "module-hal-detect" (index: #0; argument: ""). > > D: authkey.c: Got 0 bytes from cookie file '/var/run/pulse/.esd_auth', > > expected 16 I: module.c: Loaded "module-esound-protocol-unix" (index: #1; > > argument: ""). I: protocol-native.c: Allowing access to group > > 'pulse-access'. > > D: authkey.c: Got 0 bytes from cookie file > > '/var/run/pulse/.pulse-cookie', expected 256 I: protocol-native.c: > > loading cookie from disk. > > I: module.c: Loaded "module-native-protocol-unix" (index: #2; argument: > > ""). I: module-volume-restore.c: starting with empty ruleset. > > I: module.c: Loaded "module-volume-restore" (index: #3; argument: ""). > > I: module.c: Loaded "module-default-device-restore" (index: #4; argument: > > ""). I: module.c: Loaded "module-rescue-streams" (index: #5; argument: > > ""). I: module.c: Loaded "module-suspend-on-idle" (index: #6; argument: > > ""). D: cli-command.c: Checking for existance of > > '/usr/lib/pulse-0.9/modules//module-x11-publish.so': success D: > > module-x11-publish.c: using already loaded auth cookie. > > E: x11wrap.c: XOpenDisplay() failed > > E: module.c: Failed to load module "module-x11-publish" (argument: ""): > > initialization failed. E: main.c: Module load failed. > > E: main.c: failed to initialize daemon. > > I: module.c: Unloading "module-hal-detect" (index: #0). > > D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus, > > path=/org/freedesktop/DBus, member=NameAcquired D: module-hal-detect.c: > > dbus: interface=org.freedesktop.DBus.Local, > > path=/org/freedesktop/DBus/Local, member=Disconnected I: module.c: > > Unloaded "module-hal-detect" (index: #0). > > I: module.c: Unloading "module-esound-protocol-unix" (index: #1). > > I: module.c: Unloaded "module-esound-protocol-unix" (index: #1). > > I: module.c: Unloading "module-native-protocol-unix" (index: #2). > > I: module.c: Unloaded "module-native-protocol-unix" (index: #2). > > I: module.c: Unloading "module-volume-restore" (index: #3). > > I: module.c: Unloaded "module-volume-restore" (index: #3). > > D: core-subscribe.c: dropped redundant event. > > I: module.c: Unloading "module-default-device-restore" (index: #4). > > I: module.c: Unloaded "module-default-device-restore" (index: #4). > > D: core-subscribe.c: dropped redundant event. > > I: module.c: Unloading "module-rescue-streams" (index: #5). > > I: module.c: Unloaded "module-rescue-streams" (index: #5). > > D: core-subscribe.c: dropped redundant event. > > I: module.c: Unloading "module-suspend-on-idle" (index: #6). > > I: module.c: Unloaded "module-suspend-on-idle" (index: #6). > > D: core-subscribe.c: dropped redundant event. > > I: main.c: Daemon terminated. > > > > I did an lspci and got: > > > > 00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory > > Controller Hub (rev 04) 00:01.0 PCI bridge: Intel Corporation > > 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04) 00:1b.0 Audio > > device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High > > Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel > > Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev > > 03) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 00:1c.3 > > PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI > > Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB > > Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB > > UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB > > Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB > > UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 > > PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) > > 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC > > Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation > > 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 IDE > > interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev > > 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > > SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI > > Technologies Inc RV380 0x3e50 [Radeon X600] 01:00.1 Display controller: > > ATI Technologies Inc RV380 [Radeon X600] (Secondary) 03:00.0 Ethernet > > controller: Marvell Technology Group Ltd. 88E8050 PCI-E ASF Gigabit > > Ethernet Controller (rev 17) 06:02.0 Communication controller: Conexant > > HSF 56k Data/Fax Modem 06:05.0 FireWire (IEEE 1394): Agere Systems FW323 > > (rev 61) > > > > Any suggestions on how to get audio working would be appreciated. > > I used this to remove pulse audio: > > #yum remove alsa-plugins-pulseaudio and then my F8 audio came back fine. > > > > -- > > Karl F. Larsen, AKA K5DI > Linux User > #450462 http://counter.li.org. I could not agree with you more Karl. Over the years on different distro's I've got the sound sorted, and now pulse audio is brought into the equation, and wants to screw the sound up again. I'm sure there are probably some benefits to using pulseaudio, but at the moment all I want is my sound to work, and pulseaudio on F8 is messing with it. I won't go into the problems I'm having with udev in the ordering of video devices for my webcam, and tvcard. that's for another day. All I can say is that pre udev kernels always order the tvcard as /dev/video0, and the webcam as /dev/video1, but it's really hit and miss with kernels that use udev. I've reached the stage where I have 2 desktop icons for Xawtv. 1 pointing to /dev/video0, and the other to /dev/video1. I'm watching the Marx brothers on the TV at the mo, and this sounds like a Marx Bros situation. If one don't work try the other. Hope your having a nice evening. Nigel. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
