Re: looking for suggestions - radeon display bad

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



peter lesterhuis wrote:

This is how I got the 'fglrx' driver to work on Fedora 8 with Livna
> repository....
> > # to get rid of the vestiges of a failed install attempt...
> yum remove \
>   kmod-fglrx \
>   kmod-fglrx-2.6.23.1-49 \
>   xorg-x11-drv-fglrx \
>   livna-config-display
> rpm -ivh \
>   /var/cache/yum/livna/packages/kmod-fglrx \
>   /var/cache/yum/livna/packages/kmod-fglrx-2.6.23.1-49 \
>   /var/cache/yum/livna/packages/xorg-x11-drv-fglrx \
>   /var/cache/yum/livna/packages/livna-config-display

My problem with the above was that it seemed to hang while installing
> kmod-fglrx-2.6.23.1-49 which as far as I could tell, was while doing
> linking and finally, I just installed via rpm which worked.
>
I tried to install kmod-fglrx (yum install kmod-fglrx). It seemed to install well, but X wouln't start anymore, even when I changed xorg.conf back to "radeon". I couldn't get kmod-fglrx removed (yum remove kmod-fglrx) so in the end I reinstalled f8.
Peter


It sounds like an extreme measure to reinstall because of an X driver. I was tempted to go from the rawhide version back to Fedora 8 when X would not start on reboot from an Fedora 8 to a rawhide upgrade. My options were limited though because I still did not get around to burning the F8 iso to disc. No disc, no way to easily upgrade. After logging into a root terminal, I used midnight commander and removed the xorg.conf file. I then unthinking logged into another virtual terminal as a regular user. I typed startx in the user terminal and X started. The big surprise that this worked is because when I tried to run system-config-display --reconfig from root, the mouse did not work so it was useless. I guess the synaptics driver is busted so s-c-display must be checking for snaptics drivers prior to configuration. I don't know why since there is no need for scrolling using the tool.

About the radeon driver and the new server and driver. The text seems sharper and less washed out. It is not substantial. The log for Rawhide with the radeon driver is attached.

I guess the rest is to say the new X by user perspective works better. I would not recommend rushing out to try the rawhide version just yet. I'll leave the other issues to bugzilla regarding the radeon driver and synaptics breakage which is already known about.

Jim

--
Your good nature will bring unbounded happiness.
X.Org X Server 1.4.0.1
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.20-1.3002.fc6xen i686 
Current Operating System: Linux HP-JCF7 2.6.23.1-49.fc8 #1 SMP Thu Nov 8 21:41:26 EST 2007 i686
Build Date: 13 November 2007  05:47:17PM
Build ID: xorg-x11-server 1.4.99.1-0.10.fc9 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 16 18:47:56 2007
(EE) Unable to locate/open config file
(II) Loader magic: 0x81e9660
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 3.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:5:0) unknown vendor (0x1002) Radeon Mobility U1 rev 0, Mem @ 0xe0000000/0, 0xd0100000/0, I/O @ 0x00009000/0, BIOS @ 0x????????/131072
(==) Matched ati for the autoconfigured driver
New driver is "ati"
(==) Using default built-in configuration (54 lines)
(==) --- Start of built-in configuration ---
	Section "Module"
		Load	"extmod"
		Load	"dbe"
		Load	"glx"
		Load	"freetype"
		Load	"record"
		Load	"dri"
	EndSection
	Section "Monitor"
		Identifier	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default ati Device 0"
		Driver	"ati"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default ati Screen 0"
		Device	"Builtin Default ati Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vga Device 0"
		Driver	"vga"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vga Screen 0"
		Device	"Builtin Default vga Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default ati Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default vga Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) |   |-->Monitor "Builtin Default Monitor"
(**) |   |-->Device "Builtin Default ati Device 0"
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) |   |-->Monitor "Builtin Default Monitor"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "Builtin Default Monitor"
(**) |   |-->Device "Builtin Default vesa Device 0"
(**) |-->Screen "Builtin Default vga Screen 0" (3)
(**) |   |-->Monitor "Builtin Default Monitor"
(**) |   |-->Device "Builtin Default vga Device 0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) OS-reported resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0.1, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 6.7.195
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 3.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 0.3.1
	ABI class: X.Org Video Driver, version 3.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 3.0
(II) LoadModule: "vga"
(WW) Warning, couldn't open module vga
(II) UnloadModule: "vga"
(EE) Failed to load module "vga" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) ATI: ATI driver wrapper (version 6.7.195) for chipsets: mach64, rage128, radeon
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for ati
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 4.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 3.0
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(WW) RADEON: No matching Device section for instance (BusID PCI:0@0:0:0) found
(WW) RADEON: No matching Device section for instance (BusID PCI:0@0:1:0) found
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon IGP320M (U1) 4336 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 0.0.2
	ABI class: X.Org Video Driver, version 3.0
(EE) open /dev/fb0: No such file or directory
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0xd0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 0.1.0
	ABI class: X.Org Video Driver, version 3.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 3.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon IGP320M (U1) 4336" (ChipID = 0x4336)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(II) RADEON(0): AGP card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2048x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=19186 rd=426 min=12000 max=35000; xclk=13300
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-3, DACType-0, TMDSType-0, ConnectorType-2
(II) RADEON(0): Port4: DDCType-5, DACType-2, TMDSType-2, ConnectorType-1
(II) RADEON(0): Port5: DDCType-0, DACType-1, TMDSType-2, ConnectorType-6
(II) RADEON(0): Output VGA-0 using monitor section Builtin Default Monitor
(II) RADEON(0): I2C bus "VGA_DDC" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LCD_DDC" initialized.
(II) RADEON(0): Panel ID string: 1024x768                
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 16, HSyncWidth: 136
VBlank: 38, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Using LVDS Native Mode
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J 
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- VGA_DDC
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- Proprietary/LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- LCD_DDC
(II) RADEON(0): Port2:
 Monitor   -- AUTO
 Connector -- STV
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- None
 DDC Type  -- None
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): DDC Type: 5, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 5, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output LVDS using initial mode 1024x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0.1, module version = 1.2.0
	ABI class: X.Org Video Driver, version 3.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x2fff2800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7165
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1000000
(II) RADEON(0): Will use depth buffer at offset 0x1400000
(II) RADEON(0): Will use 106496 kb for textures at offset 0x1800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x0f000207 [AGP 0x1002/0xcab0; Card 0x1002/0x4336]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xd4000000
(II) RADEON(0): [agp] Ring mapped at 0xb7ed1000
(II) RADEON(0): [agp] ring read ptr handle = 0xd4101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7fe4000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd4102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xafc60000
(II) RADEON(0): [agp] GART texture map handle = 0xd4302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaf780000
(II) RADEON(0): [drm] register handle = 0xd0100000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x2fff2800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 2
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x2fff2800 is: 0x2fff2800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xd47fd400
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x2fff2800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xd47fd400
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1024 x 7161
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(WW) Warning, couldn't open module theatre_detect
(II) UnloadModule: "theatre_detect"
(EE) RADEON: Failed to load module "theatre_detect" (module does not exist, 0)
(EE) RADEON(0): Unable to load Rage Theatre detect module
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/radeon_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
enable montype: 2
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 5, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
enable montype: 2
enable montype: 2
enable montype: 2
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 5, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): DDC Type: 3, Detected Monitor Type: 0
(II) RADEON(0): DDC Type: 5, Detected Monitor Type: 0
(II) RADEON(0): Detected Monitor Type: 2
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux