I got an old Epson's matrix printer connected to my laptop Dell Inspiron 1501 at usb port through a converting cable (from lpt port). Somehow with the help system-config-printer I have set it up to print. But it does not work always - and there are hard times when I need to print and I can not. I have noticed some magic with wither the cable is inserted into usb port on laptop start or not, was the printer turned on before the usb connector insertion or after, etc. From this magic depends whether I have printing or I am in trouble since it refuses to print. That is how it happens: I send to print from OO - the printer is set to be default device a window appears that it was sent to be printed, in KDE's printers (I use KDE) I see a job is hanging with status 'processing...' and the printer does nothing. So, what I want is: 1. Set it up the way it works *always*. 2. Tune it up with the margins printing. Here are some questions I've got with this: 1. Which tool to use: I have at least 2 in my F7 (upgraded from FC6): KDE's and the above mentioned system-config. Here is the problem: in system-config I can not specify the device - now it is set as usb://unknown/ Seems, it is /dev/usb/lp0 - but I do not how to set it up there - may hence the printer does not work. Seems it works through cups. In KDE's when it is fired up, informs that the printer has unknown to the tool params and they will not be modified - since the dilemma which tool to use. 2. How to specify (find out) the printer's device? Thanks for answers if any. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
