On Sun, 14 Oct 2007 11:24:59 -0600 Karl Larsen <k5di@xxxxxxxxxx> wrote: > > I have learned a lot about SELinux in the past week. It turns out > the simple fix is to just turn it off. But it is possible I have > learned to live with SELinux turned full on and what to do if there > is trouble. > > This all started when I had to turn on SELinux to use a device, > so I did and there was no problem. So I left it turned on. Then one > morning I turned on my computer and instead of booting clear up in > just one minute, it stopped when init tried to turn on "cups". It > stayed there for 10 minutes! My thoughts were, how did I screw up the > file system so bad? So turned off the boot and booted up in the > rescue mode from a CD, and did #fsck /dev/sdb5 and it said there is > nothing wrong. I too had SELinux issues. Mine were of my own doing though. I soon found out the easies way to get my box to boot was as Karl mentioned, boot from the CD and rescue it. I mounted the drive (as suggested) but simply edited the /etc/selinux/config file with a simple SELINUX=disabled Bingo - that solved that, rebooted and all was good. What I did next was simply tar up the /selinux directory from my lappy and then applied the tarball to my desktop. Went back into SELinux and had it enabled and set it to relabel on next boot-up. All seems fine after a week. Not sure how I mucked mine up, but I did and this is what I did to correct my fat-fingering. -- Best regards, Chris Registerd Linux user number 448639 -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
