Lots of side tracking that is not solving your problem. Someone asked that you run the following and post the output: # fdisk -l This was in the thread "Grub is hard to make work". When you post an issue you have to stick to the same subject line in order to keep all advice in order. If you post that along with your grub.conf file (which youv'e done unless you've since changed it). It is possible that your problem is as simple as the root command in grub.conf pointing to the wrong drive/partition. A person cannot trouble shoot your grub.conf file with any degree of confidence in their advice without knowing what drives you have in the box (how many, including if they are SATA or IDE) and the partition (hence the fdisk -l request) along with your grub.conf file. Regards modules I am no expert on it. But one simple example of a module is for NTFS support. You can compile a kernel with a bunch of modules to support a bunch of different stuff. But then your kernel is bloated with stuff you may only need once in a while. Instead you can insert modules as you need them (insmod or modprobe) so that you are not running a bloated kernel. So a module is just some code to provide support/functionality. And you can add that support/functionality by installing that module (again with insmod or modprobe) into the running kernel. And you can remove it if necessary. Beyond that I can't explain it nor is it likely needed anyhow to trouble shoot your situation. So fdisk -l and provide the output. Jacques B. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
