Ed Greshko escribió:
Martin Marques wrote:
I've experienced problems with logouts (any user) on my FC6. Basically,
X crashes and I end up in a terminal. From there I can start X again
without a problem but on logout I don't get the kdm login screen.
Looking at the logs I found something very peculiar:
When starting X and kdm ffom boot I see this in the Xorg.0.log:
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] loaded kernel module for "savage" driver
(II) SAVAGE(0): [drm] DRM interface version 1.3
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xe00fd000
(II) SAVAGE(0): [drm] mapped SAREA 0xe00fd000 to 0xb7f11000
(II) SAVAGE(0): [drm] framebuffer handle = 0xd0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3116; Card
0x5333/0x8d04]
But when I logout and X has to restart I get this:
(II) SAVAGE(0): [drm] bpp: 32 depth: 24
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] DRM interface version 1.0
(II) SAVAGE(0): [drm] drmSetBusid failed (6, pci:0000:01:00.0),
Permission denied
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
Now, two things come up from here:
1) In the first boot it's using version 1.3 of DRM interface, while at
restart it uses 1.0. What can be wrong?
2) There seems to be a permission error when trying to access the SAVAGE
card at the busid specified.
Any clues?
Maybe following the procedures in this link will help?
http://dri.freedesktop.org/wiki/DriTroubleshooting
Ed, this doesn't help me as X comes up OK, but after a logout out it
tries to start in a different manner, and then is when it fails.
--
select 'mmarques' || '@' || 'unl.edu.ar' AS email;
---------------------------------------------------------
Martín Marqués | Programador, DBA
Centro de Telemática | Administrador
Universidad Nacional
del Litoral
---------------------------------------------------------
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
