FC7 custom kernel isn't finding your ICH8 controller at all. You
definately want to file a bug report on this.
FC6:
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2120-0x2127, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8009GAH, ATA DISK drive
hdb: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, ATAPI CD/DVD-ROM drive
---
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03)
(prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 2120 [size=16]
~BAS
On Thu, 20 Sep 2007, Bjorge Solli wrote:
Took a bit longer as scp was not on it, and I don't have any ftp-servers
ready. Ended up using netcat in the end.
The FC7 kernel is 2.6.21-1.3194.fc7 i686 used for netinstall.
Find the files attached.
Regards
Bjørge
Brian A. Seklecki wrote:
We need to compare the dmesg(8) output from both. You can scp(1)/ftp(1) it
off of the booted install CD using the emergency shell on the alternative
terminal. Just:
# dmesg > /tmp/dmesg.boot
Also:
# lspci -v
...would be very useful.
~BAS
On Tue, 18 Sep 2007, Bjorge Solli wrote:
I have got my hands on a preproduction test machine, called HP Compaq
2510p. I will have to return it to HP soon.. It is a 10"(?) laptop.
I have tested it with our kickstart install system. It installs Fedora
Core 6 32-bit fine, but when I try Fedora 7 32-bit it doesn't find the
harddrive! Is there any interest from Fedora developers for me to supply
them with some info to make this work? Note that I have a time limit.
Please reply to me directly, as I guess this is beyond the scope of this
list.
Mvh
Bjørge Solli
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"Guilty? Yeah. But he knows it. I mean, you're guilty.
You just don't know it. So who's really in jail?"
~Maynard James Keenan
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"Guilty? Yeah. But he knows it. I mean, you're guilty.
You just don't know it. So who's really in jail?"
~Maynard James KeenanLinux version 2.6.22.5-49.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Aug 30 13:28:55 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003e7b0000 (usable)
BIOS-e820: 000000003e7b0000 - 000000003e7c5400 (reserved)
BIOS-e820: 000000003e7c5400 - 000000003e7e7fb8 (ACPI NVS)
BIOS-e820: 000000003e7e7fb8 - 000000003f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
103MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 255920) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 255920
early_node_map[1] active PFN ranges
0: 0 -> 255920
On node 0 totalpages: 255920
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 207 pages used for memmap
HighMem zone: 26337 pages, LIFO batch:7
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000F76E0, 0024 (r2 HP )
ACPI: XSDT 3E7C81C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP 3E7C8084, 00F4 (r4 HP 30C9 3 HP 1)
ACPI: DSDT 3E7C8538, 12B11 (r1 HP nc2500 10000 MSFT 3000001)
ACPI: FACS 3E7E7D80, 0040
ACPI: SLIC 3E7C8244, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET 3E7C83BC, 0038 (r1 HP 30C9 1 HP 1)
ACPI: APIC 3E7C83F4, 0068 (r1 HP 30C9 1 HP 1)
ACPI: MCFG 3E7C845C, 003C (r1 HP 30C9 1 HP 1)
ACPI: TCPA 3E7C8498, 0032 (r2 HP 30C9 1 HP 1)
ACPI: ASF! 3E7C84CC, 0069 (r16 HP CHIMAYU 1 HP 0)
ACPI: SSDT 3E7DB049, 02BE (r1 HP HPQPAT 1 MSFT 3000001)
ACPI: SSDT 3E7DBB09, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT 3E7DBD68, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
ACPI: SSDT 3E7DBE0E, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f000000:bfc00000)
Built 1 zonelists. Total pages: 253921
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07be000 soft=c079e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1064.059 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1008060k/1023680k available (2224k kernel code, 14928k reserved, 1177k data, 260k init, 106176k highmem)
virtual kernel memory layout:
fixmap : 0xffc55000 - 0xfffff000 (3752 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0758000 - 0xc0799000 ( 260 kB)
.data : 0xc062c120 - 0xc0752584 (1177 kB)
.text : 0xc0400000 - 0xc062c120 (2224 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 2131.21 BogoMIPS (lpj=1065605)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU U7500 @ 1.06GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07bf000 soft=c079f000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2128.01 BogoMIPS (lpj=1064006)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU U7500 @ 1.06GHz stepping 0d
Total of 2 processors activated (4259.22 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
Time: 12:40:44 Date: 08/18/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C003] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0AF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C130._PRT]
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C13F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C140] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C141] (IRQs 10 *11)
ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
ACPI: Power Resource [C29D] (on)
ACPI: Power Resource [C1C4] (off)
ACPI: Power Resource [C3B4] (off)
ACPI: Power Resource [C3B5] (off)
ACPI: Power Resource [C3B6] (off)
ACPI: Power Resource [C3B7] (off)
ACPI: Power Resource [C3B8] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:00: iomem range 0x100000-0x3e7fffff could not be reserved
pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x2f8-0x2ff has been reserved
pnp: 00:0c: ioport range 0x3f8-0x3ff has been reserved
pnp: 00:0c: ioport range 0x1000-0x107f has been reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
pnp: 00:0d: iomem range 0xcee00-0xcffff has been reserved
pnp: 00:0d: iomem range 0xd2000-0xd3fff has been reserved
pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: e0000000-e00fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 40000000-43ffffff
MEM window: 44000000-47ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: e0100000-e03fffff
PREFETCH window: 40000000-43ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1501k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1190119255.053:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 67DFFD21BD26F3EA
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
ACPI: Transitioning device [C3B9] to D3
ACPI: Transitioning device [C3B9] to D3
ACPI: Fan [C3B9] (off)
ACPI: Transitioning device [C3BA] to D3
ACPI: Transitioning device [C3BA] to D3
ACPI: Fan [C3BA] (off)
ACPI: Transitioning device [C3BB] to D3
ACPI: Transitioning device [C3BB] to D3
ACPI: Fan [C3BB] (off)
ACPI: Transitioning device [C3BC] to D3
ACPI: Transitioning device [C3BC] to D3
ACPI: Fan [C3BC] (off)
ACPI: Transitioning device [C3BD] to D3
ACPI: Transitioning device [C3BD] to D3
ACPI: Fan [C3BD] (off)
ACPI: SSDT 3E7DB3CF, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317)
ACPI: SSDT 3E7DB64F, 04BA (r1 HP Cpu0Cst 3001 INTL 20060317)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3E7DB307, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
ACPI: SSDT 3E7DB5CA, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clocksource tsc unstable (delta = -370781854 ns)
ACPI: Thermal Zone [TZ0] (59 C)
ACPI: Thermal Zone [TZ1] (56 C)
ACPI: Thermal Zone [TZ3] (47 C)
ACPI: Thermal Zone [TZ4] (30 C)
ACPI: Thermal Zone [TZ5] (30 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 16 (level, low) -> IRQ 16
0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 16) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2120-0x2127, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK8009GAH, ATA DISK drive
hdb: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x45
hdb: selected mode 0x22
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9]
Yenta: ISA IRQ mask 0x04b8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 7:774:683
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 260k freed
Write protecting the kernel read-only data: 902k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 19, io base 0x00002080
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PS/2 Generic Mouse as /class/input/input1
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x000020e0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 1-1: USB disconnect, address 2
SCSI subsystem initialized
libata version 2.21 loaded.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1190119272.301:2): selinux=0 auid=4294967295
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
tpm_inf_pnp 00:02: Found C282 with ID IFX0102
tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci: SDHCI controller found at 0000:02:06.2 [1180:0822] (rev 21)
ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20
mmc0: SDHCI at 0xe0102000 irq 20 DMA
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:19.0 to 64
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:24:1b:b4:10
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 0.0.25kd
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:10:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
Floppy drive(s): fd0 is 1.44M
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
iwl4965: iwlwifi-4965.ucode firmware file req failed: Reason -2
iwl4965: Could not read microcode: -2
ACPI: PCI interrupt for device 0000:10:00.0 disabled
iwl4965: probe of 0000:10:00.0 failed with error -2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f992991100e]
floppy0: no floppy controllers found
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
ACPI: AC Adapter [C238] (on-line)
ACPI: Battery Slot [C23A] (battery present)
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C2BD]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C152]
set_level status: 0
ACPI: Video Device [C097] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2104504k swap on /dev/hda3. Priority:-1 extents:1 across:2104504k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ip6_tables: (C) 2000-2006 Netfilter Core Team
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ip_tables: (C) 2000-2006 Netfilter Core Team
input: AT Translated Set 2 keyboard as /class/input/input6
fuse init (API version 7.8)
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e0400000 (64-bit, non-prefetchable) [size=1M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=8]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 3
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0
Memory at e0500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
00:03.0 Communication controller: Intel Corporation Mobile HECI Controller (rev 0c)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e0600000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
00:03.2 IDE interface: Intel Corporation Mobile PT IDER Controller (rev 0c) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
I/O ports at 2008 [size=8]
I/O ports at 2010 [size=4]
I/O ports at 2018 [size=8]
I/O ports at 2020 [size=4]
I/O ports at 2030 [size=16]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
00:03.3 Serial controller: Intel Corporation Mobile KT Controller (rev 0c) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
I/O ports at 2040 [size=8]
Memory at e0601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at e0620000 (32-bit, non-prefetchable) [size=128K]
Memory at e0640000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 2060 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 2080 [size=32]
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 20a0 [size=32]
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at e0641000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at e0644000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Capabilities: [40] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: e0000000-e00fffff
Capabilities: [40] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 20c0 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 20e0 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 2100 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at e0648000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0100000-e03fffff
Prefetchable memory behind bridge: 0000000040000000-0000000043f00000
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 2120 [size=16]
02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at e0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 44000000-47fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001
02:06.1 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 04) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at e0101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
02:06.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at e0102000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
02:06.3 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 11)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e0103000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
10:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)
Subsystem: Intel Corporation Unknown device 1000
Flags: fast devsel, IRQ 17
Memory at e0000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint IRQ 0
nit
<6>pnp: PnP ACPI: found 14 devices
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>NetLabel: Initializing
<6>NetLabel: domain hash size = 128
<6>NetLabel: protocols = UNLABELED CIPSOv4
<6>NetLabel: unlabeled traffic allowed by default
<6>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
<6>pnp: 00:00: iomem range 0x100000-0x3e7fffff could not be reserved
<6>Time: tsc clocksource has been installed.
<6>Switched to high resolution mode on CPU 0
<6>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
<6>pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
<6>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
<6>pnp: 00:0c: ioport range 0x2f8-0x2ff has been reserved
<6>pnp: 00:0c: ioport range 0x3f8-0x3ff has been reserved
<6>pnp: 00:0c: ioport range 0x1000-0x107f has been reserved
<6>Switched to high resolution mode on CPU 1
<6>pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
<6>pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
<6>pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
<6>pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
<6>pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
<6>pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
<6>pnp: 00:0d: iomem range 0xcee00-0xcffff has been reserved
<6>pnp: 00:0d: iomem range 0xd2000-0xd3fff has been reserved
<6>pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
<6>pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
<4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.1
<6> IO window: disabled.
<6> MEM window: e0000000-e00fffff
<6> PREFETCH window: disabled.
<4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
<4> IO window: 00003000-000030ff
<4> IO window: 00003400-000034ff
<4> PREFETCH window: 40000000-43ffffff
<4> MEM window: 44000000-47ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: 3000-3fff
<6> MEM window: e0100000-e03fffff
<6> PREFETCH window: 40000000-43ffffff
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 6493k freed
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>audit(1190130987.657:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<7>SELinux: Registering netfilter hooks
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key C3680E46D35DB7E1
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<4>ACPI: Transitioning device [C3B9] to D3
<4>ACPI: Transitioning device [C3B9] to D3
<6>ACPI: Fan [C3B9] (off)
<4>ACPI: Transitioning device [C3BA] to D3
<4>ACPI: Transitioning device [C3BA] to D3
<6>ACPI: Fan [C3BA] (off)
<4>ACPI: Transitioning device [C3BB] to D3
<4>ACPI: Transitioning device [C3BB] to D3
<6>ACPI: Fan [C3BB] (off)
<4>ACPI: Transitioning device [C3BC] to D3
<4>ACPI: Transitioning device [C3BC] to D3
<6>ACPI: Fan [C3BC] (off)
<4>ACPI: Transitioning device [C3BD] to D3
<4>ACPI: Transitioning device [C3BD] to D3
<6>ACPI: Fan [C3BD] (off)
<4>ACPI: SSDT 3E7DB3CF, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317)
<4>ACPI: SSDT 3E7DB64F, 04BA (r1 HP Cpu0Cst 3001 INTL 20060317)
<7>Monitor-Mwait will be used to enter C-1 state
<7>Monitor-Mwait will be used to enter C-2 state
<7>Monitor-Mwait will be used to enter C-3 state
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI: SSDT 3E7DB307, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
<4>ACPI: SSDT 3E7DB5CA, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
<6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>Time: hpet clocksource has been installed.
<6>ACPI: Thermal Zone [TZ0] (54 C)
<6>ACPI: Thermal Zone [TZ1] (57 C)
<6>ACPI: Thermal Zone [TZ3] (45 C)
<6>ACPI: Thermal Zone [TZ4] (30 C)
<6>ACPI: Thermal Zone [TZ5] (30 C)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>agpgart: Detected an Intel 965GM Chipset.
<6>agpgart: Detected 7676K stolen memory.
<6>agpgart: AGP aperture is 256M @ 0xd0000000
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 16 (level, low) -> IRQ 16
<6>0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 16) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
<6>input: Macintosh mouse button emulation as /class/input/input0
<6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9]
<6>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
<6>Socket status: 30000006
<6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
<6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
<6>cs: IO port probe 0x3000-0x3fff: clean.
<6>pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
<6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
<6>usbcore: registered new interface driver libusual
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>TCP bic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Using IPI No-Shortcut mode
<4> Magic number: 7:851:942
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Freeing unused kernel memory: 236k freed
<4>Write protecting the kernel read-only data: 803k
<3>synaptics reset failed
<3>synaptics reset failed
<3>synaptics reset failed
<6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
<6>input: SynPS/2 Synaptics TouchPad as /class/input/input1
<6>input: AT Translated Set 2 keyboard as /class/input/input2
<6>input: PS/2 Generic Mouse as /class/input/input3
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<4>Clocksource tsc unstable (delta = -363578371 ns)
<4>floppy0: no floppy controllers found
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>input: PC Speaker as /class/input/input4
<6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
<6>NET: Registered protocol family 10
<6>lo: Disabled Privacy Extensions
<6>Mobile IPv6
<5>SCSI subsystem initialized
<6>Loading iSCSI transport class v2.0-724.
<5>iscsi: registered transport (tcp)
<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1a.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 4 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe0648000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 19 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002080
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.1: irq 21, io base 0x000020e0
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>usb 3-1: new full speed USB device using uhci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>usb 5-2: new full speed USB device using uhci_hcd and address 2
<6>usb 5-2: configuration #1 chosen from 1 choice
<6>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 20
<5>fw_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10
<5>fw_core: created new fw device fw0 (0 config rom retries)
<6>cs: IO port probe 0x100-0x3af: clean.
<6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:19.0 to 64
<6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:24:1b:b4:10
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<7>security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
<7>security: 60 classes, 65638 rules
<7>SELinux: Completing initialization.
<7>SELinux: Setting up existing superblocks.
<7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
<7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>audit(1190131023.178:2): policy loaded auid=4294967295
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 4292.000 MB/sec
<4>raid5: using function: pIII_sse (4292.000 MB/sec)
<4>raid6: int32x1 433 MB/s
<4>raid6: int32x2 484 MB/s
<4>raid6: int32x4 449 MB/s
<4>raid6: int32x8 398 MB/s
<4>raid6: mmxx1 1539 MB/s
<4>raid6: mmxx2 1714 MB/s
<4>raid6: sse1x1 1046 MB/s
<4>raid6: sse1x2 1355 MB/s
<4>raid6: sse2x1 1925 MB/s
<4>raid6: sse2x2 2128 MB/s
<4>raid6: using algorithm sse2x2 (2128 MB/s)
<6>md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<6>md: raid10 personality registered for level 10
<4>GFS2 (built May 23 2007 22:13:32) installed
<6>Lock_Nolock (built May 23 2007 22:13:44) installed
<6>JFS: nTxBlock = 7894, nTxLock = 63153
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
<5>audit(1190131027.178:3): audit_pid=786 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
