Ed Greshko wrote:
david walcroft wrote:
I changed the Eth1 address to 192.168.0.1
Subnet default to 255.255.255.255
Most likely it should be 255.255.255.0
default Gateway to 192.168.0.0
Probably should not be set at all for that interface. Post the output of
"netstat -rn".
Would this be correct
I'm using a crossover cable.
If you are using a crossover cable on eth1 then you don't need DHCP. Better
to go with static network settings.
I see that there's a DHCP upgrade in Updates,I hope this can help with
this problem.
Just forget about using DHCP on eth1. Life will be easier.
I have changed my ethernet card on Eth1.
My Iptables have not been changed for a long time,how would I test it
for any problems.
My netstat -rn
[david@reddwarf ~]$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
121.208.32.0 0.0.0.0 255.255.248.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth1
0.0.0.0 121.208.32.1 0.0.0.0 UG 0 0 0
eth0
[david@reddwarf ~]$
Thanks david
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
