Somebody in the thread at some point said: > I have a core 4 box that has behaved admirably for a long time. I just > added an F7 box where SE is disabled. > > Here's my problem. On the F7 box, I just happen to have a half dozen > files that are about 8Gig. When I try to transfer a file using scp to > the FC7 box ssh, the F7 box just crashes. Sometimes it crashes around > 300M, sometimes 300M, my latest died at 567M. > > F7 happens to have two NICs and the crash happens regardless of which > NIC I use. (I tried both hoping that it might be a hardware problem, but > I won't buy that both are bad.) Smaller transfers and regular network > traffic work just fine. There is nothing in syslog on either side when > it happens. Doubt it's anything to do with scp or ssh, it sounds more like a generic memory or heat problem, or an issue with the NIC or HDD controller driver under load. Can you see the F7 box video output in text mode and see if it blows a panic? You can also try monitoring /proc/acpi/thermal_zone/*/temperature on the F7 box in another ssh session while the transfer progresses. -Andy -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
