On 8/30/07, James Pifer <jep@xxxxxxxxxxxxxxxx> wrote: > I'm hoping someone here can help me. I'm trying to get twinview or clone > working on my nvidia FX 5200 card on FC7. I have these nvidia packages > installed: > nvidia-graphics-devices-1.0-5.fc7 > nvidia-graphics9755-libs-1.0_9755-87.fc7 > nvidia-graphics-helpers-0.0.21-22.fc7 > nvidia-graphics9755-1.0_9755-87.fc7 > nvidia-graphics9755-kmdl-2.6.22.4-65.fc7-1.0_9755-87.fc7 > > Right now I have the display working on the SVideo port, but not on the > DVI. I would like to see the same display on both. > > A couple people on the mythtv list tried to help but they had > conflicting information. For example, I used one of their xorg.conf as a > template, which gave me two device and two screen sections. Then the > other guy said you should only have one of each. He made a couple > suggestions, but not specific so I had to trial and error. I asked if he > would share his xorg.conf and I never heard back. Maybe I still will > since it was only yesterday. > > Anyway, below is my current xorg.conf. Can anyone suggest any *specific* > changes to my xorg.conf that might get the display working on BOTH the > SVideo and DVI ports? I'm tried of trying million changes, reboot, try > again, etc... > > Thanks, > James > ------------------------------------------------------------------------- > Section "ServerLayout" > Identifier "single head configuration" > Screen 0 "Screen0" 0 0 > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > ModulePath "/usr/lib/xorg/modules/extensions/nvidia" > ModulePath "/usr/lib/xorg/modules/extensions" > ModulePath "/usr/lib/xorg/modules" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > Load "v4l" > Load "vnc" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > Section "Device" > #Option "RenderAccel" "1" > # TV Out Setup > Identifier "Videocard0" > Driver "nvidia" > VendorName "Videocard vendor" > BoardName "nVidia Corporation NV34 [GeForce FX 5200]" > Option "ConnectedMonitor" "CRT, TV" > Option "TwinView" "True" > Option "TwinViewOrientation" "Clone" > Option "TVStandard" "NTSC-M" > Option "TVOutFormat" "SVIDEO" > Option "UseEvents" "True" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > DefaultDepth 24 > Option "TVStandard" "NTSC-M" > Option "ConnectedMonitor" "TV" > Option "TVOutFormat" "COMPOSITE" > Option "SecurityTypes" "VncAuth" > Option "UserPasswdVerifier" "VncAuth" > Option "PasswordFile" "/root/.vnc/passwd" > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection Why are you using two conflicting TVOutFormat options? Why are you using two conflicting ConnectedMonitor options (when you really shoulnd't be using any)? Is your TV capable of doing 1024x768 ? That definitely won't work with Composite out. Also, 1.0-9755 is no longer supported. You should upgrade to 100.14.11. See: http://www.nvnews.net/vbulletin/showthread.php?t=46678 -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
