On Tue, Aug 28, 2007 at 01:44:28PM -0400, Andrew Robinson wrote:
> [root@proteus ~]# lsmod | grep bcm43xx
>
> bcm43xx_mac80211 397601 0
> ssb 35141 1 bcm43xx_mac80211
> mac80211 145865 2 rc80211_simple,bcm43xx_mac80211
> [root@proteus ~]# ifconfig
>
> eth1 Link encap:Ethernet HWaddr 00:90:96:79:86:70
> inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0
> inet6 addr: fe80::290:96ff:fe79:8670/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:71 errors:0 dropped:0 overruns:0 frame:0
> TX packets:89 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:4118 (4.0 KiB) TX bytes:9175 (8.9 KiB)
> [root@proteus ~]# ping -c 3 192.168.1.1
>
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> From 192.168.1.25 icmp_seq=2 Destination Host Unreachable
> From 192.168.1.25 icmp_seq=3 Destination Host Unreachable
>
> --- 192.168.1.1 ping statistics ---
> 3 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2008ms
> , pipe 2
>
> [root@proteus ~]# modprobe bcm43xx-mac80211
>
> [root@proteus ~]# ifup eth1
>
> [root@proteus ~]# ping -c 3 192.168.1.1
>
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.87 ms
> 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=3.31 ms
> 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=2.95 ms
Did you leave something out? The lsmod showed that you already had
bcm43xx-mac80211 loaded ('-' == '_' for lsmod), and you already had
eth1 marked up and with an IP address assigned. I can't think of
any reason why those commands should make any difference.
Is this repeatable? Did you move the laptop during this process?
John
--
John W. Linville
linville@xxxxxxxxxx
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
