Dave Stevens wrote: > Hi, > > I am running FC6 x86_64 on an ASUS socket 939 motherboard. I have installed > 2x1g DDR2-400 chips and 2x512meg DDR2-400. This is a total of 3 gigs but I > consistently get a report of 2500 megs of installed RAM. Anyone able to > suggest why this is? > > Dave > Dumb question - what order do you have the chips in? Check the manual for your motherboard to see what configurations are acceptable. Also check how much memory your BIOS is reporting. I have run into strange cases in the past where if I put the smaller memory modules in sockets 1 and 3, and the larger ones in 2 and 4, the system would read the memory as if I had put in 4 of the smaller modules. Also make sure your board is rated for 4 memory modules of the speed you are using. If your BIOS does not see all of the RAM, then Linux will not see it. (You can also try running memtest86+ on it, and see how much memory it reports...) Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
