On Saturday 11 August 2007, Bob Goodwin wrote:
>Gene Heskett wrote:
>> On Saturday 11 August 2007, Bob Goodwin wrote:
>>> Tim wrote:
>>>> On Fri, 2007-08-10 at 15:46 -0400, Bob Goodwin wrote:
>>>>> Bus 004 Device 015: ID 050d:0980 Belkin Components [F6C800-UNV Belkin
>>>>> UPS]
>>>>
>>>> ^^^^^^ ^^^^^^^^
>>>>
>>>> Of course it'd be nice if your UPS monitoring software just found it by
>>>> itself, or presented you with a list of candidates.
>>>
>>> It does not seem to do so, it being "nut," although I may have missed
>>> something?
>>>
>>> I initially tried the Belkin provided Linux software which looks as
>>> though it might be ok, it produces some pretty screens but it wont
>>> accept the password I was asked to enter and verify. As a result I
>>> can't begin to configure it.
>>>
>>> I will continue the effort later, just had my morning coffee ...
>>>
>>> Thanks.
>>>
>>> Bob Goodwin
>>
>> And when you do get it configured, it will turn into a cpu hog, virtually
>> killing the system if either gkrellm or its own gui ever query it.
>>
>> I've tried to email them about it, but their replies always very carefully
>> talk about other things. After 4 passes at making them understand that a
>> module compiled on a red hat 5.1 system was not about to work on a modern
>> system and being totally ignored, I asked the 5th time if I was trying to
>> teach pigs to sing, and switched to apcupsd.
>> I haven't had any power failures since, so I've NDI how it will react in
>> that case. The original belkin sw would in fact issue a -wall broadcast
>> and shut things down gracefully, when it worked...
>>
>> As far as configuration, apcupsd finds /dev/hiddev0 all by itself. If you
>> have more than /dev/hiddevX, then it might need some guidance.
>
>That was good advice, I installed apcupsd and it immediately began to
>work. Controlling the UPS is not something I want to spend a few days
>on so I'm quite happy with the result so far. The configuration still
>needs some tweaking, I tried pulling the ac plug from the wall and it
>immediately initiated a shutdown which is not what I want but I suspect
>that can be fine tuned to give me a few minutes to save any work in
>progress?
>
>And I wasn't able to find where to enter a "model" name, it just reports
>UPS when I do "status." The big thing is that it worked right off
>without a lot of searching for a device file, etc.
>
>That and it shows the battery in a low state of charge? It should be
>near fully chargedsince its been doing nothing but charging for more
>than a day but that may simply based on an assumption that it is
>charging while turned on with apcupsd running? I'll wait and see if it
>comes up after a while.
>
>This is what I see for status, notice BCHARGE:
>
>service apcupsd start
>Starting UPS monitoring: [ OK ]
>[root@box6 ~]# service apcupsd status
>apcupsd (pid 4166) is running...
>APC : 001,024,0564
>DATE : Sat Aug 11 10:56:25 EDT 2007
>HOSTNAME : box6
>RELEASE : 3.14.1
>VERSION : 3.14.1 (04 May 2007) redhat
>UPSNAME : Nina
>CABLE : USB Cable
>MODEL : UPS
>UPSMODE : Stand Alone
>STARTTIME: Sat Aug 11 09:38:24 EDT 2007
>STATUS : ONLINE
>BCHARGE : 000.1 Percent
That is indeed odd, and would explain why it issued the instant shutdown.
Here, its reported as
CABLE : USB Cable
MODEL : Belkin UPS
&
BCHARGE : 100.0 Percent
>From dmesg:
[root@coyote rulesdujour]# dmesg |grep hid
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbhid 3-3.1:1.0: usb_probe_interface
usbhid 3-3.1:1.0: usb_probe_interface - got id
hiddev96: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.2-3.1
[...]
>I will remove the Belkin software. I don't need the fancy Windows style
>displays.
>
>Tnx.
>
>Bob Goodwin
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Perl 5 introduced everything else, including the ability to introduce
everything else.
-- Larry Wall in <199702252152.NAA28845@xxxxxxxx>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
