Motherboard it has an onboard raid controller. As for the BIOS update no, but I've never tried to tinker with the BIOS before cause ive heard if you screw it up your motherboard is toast. -Jerome -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Mikkel L. Ellertson Sent: Thursday, August 09, 2007 5:07 PM To: For users of Fedora Subject: Re: fedora 7 install Jerome Kan wrote: > My system is composed of 3 160 gb sata hdd and a 200 gb pata hdd the bios is the same one that the motherboard came with. When I tried to install Fedora I created a 50gb /root drive, a 2gb swap, and a 100mb /boot. There has been something that has been bugging me on this computer though. When I install windows I run into an issue by where I can't install it onto one of the faster drives, rather im stuck installing it on the pata drive. Could this be similar to the issue you were referring to about the boot loader? And if so how would I go about resolving it? > -Jerome I would try to create the /boot partition on the PATA drive and tell GRUBG to install to the MBR of the PATA drive. It sounds like the BIOS does not map the SATA drives. If this is the case, you need the entire boot loader on the PATA drive. Dumb question - do the SATA drives connect to the motherboard, or do they connect to an add-on card? Have you checked for a BIOS update to your machine? If the SATA controller is on the motherboard, there may be a BIOS update that may fix this problem. Mikkel -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting a bad thing? -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
