2007/7/23, joachim.backes@xxxxxxxxxxxxxx <joachim.backes@xxxxxxxxxxxxxx>:
Hi, having an USB scanner of type Canon Lide 30. As root, the usage of this scanner with xsane makes no problems, but the usage of xsane as non root user says: ne devices found. Running sane-find-scanner as non root user: ============================================ # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04a9, product=0x220e, chip=LM983x?) at libusb:002:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. lsusb: ===== lsusb Bus 003 Device 003: ID 0dbf:9001 Quik Tech Solutions Bus 003 Device 002: ID 0ecd:a100 Lite-On IT Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 004: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 001 Device 001: ID 0000:0000 Section from /proc/bus/usb/devices: =================================== T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04a9 ProdID=220e Rev= 1.00 S: Manufacturer=Canon S: Product=CanoScan C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Any non-root-solution? Regards Joachim Backes <joachim.backes@xxxxxxxxxxxxxx> University of Kaiserslautern,Computer Center [RHRK], Systems and Operations, High Performance Computing, D-67653 Kaiserslautern, PO Box 3049, Germany -------------------------------------------------- Phone: +49-631-205-2438, FAX: +49-631-205-3056 http://hlrwm.rhrk.uni-kl.de/home/staff/backes.html -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
same here!!! Bus 001 Device 002: ID 04b8:010b Seiko Epson Corp. Perfection 1240 why are these things happening?? New kernel seems to be a problem not a solution (wireless broke, no scanner for non-root users!!!): and who tested it??? -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list