Michael W Cocke wrote:
On Sat, 14 Jul 2007 20:24:29 -0700, you wrote:
Michael W Cocke wrote:
There used to be a way to run two modems as one logical channel to
boost the attainable bandwidth - is there a way to do that with NICs?
What's it called (so I can google it)? I have fiber needs with a
10-base-2 budget. 8-(>
What are you connected to that is at least half as wide as your NIC?
--
Knute Johnson
Molon Labe...
I rsync two 3.2 Tb (terabyte) servers every 12 hours. I'd like to do
it more often, but right now the bottleneck is holding me. In an
ideal world I'd put a fiber channel between the two servers, but not
in the budget (this is my home system).
Why do you need all that bandwidth? You only need to push over the
changes, not the whole 3.2TB. Unless you are beating the storage to
death with updates it's a non-issue. Without much tuning you should be
able to push 50MB/s out a cheap Gbit NIC, is this not enough? Are you
sure bandwidth is the issue and not handling the metadata?
In any case you can just have several NICs, put static routes on the
NICs, use jumbo packets, tune your TCP stack for large window sizes,
boost the memory available to your stack, all standard tuning methods.
I haven't done bonding in a long time, IIRC you are creating a dummy IP
address which is then routed over two existing "real" addresses, and you
do it on both ends of the bonded route. In your case, having several
NICs, with the same IP on each, and static routing on each NIC may do
what you want.
Note that this will probably mean lots of scripts to set it up, I don't
believe the graphical network setup will handle this. And if you run a
dedicated cable from one to the other on a 2nd NIC, you want P-t-P
configured on the NIC, for performance.
--
Bill Davidsen <davidsen@xxxxxxx>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
