On Fri, 2007-07-13 at 14:54 -0600, Karl Larsen wrote: > Mikkel L. Ellertson wrote: > > Renich Bon Ciric wrote: > > > >> On Sun, 2007-07-08 at 09:20 -0500, Chris Mohler wrote: > >> > >>> Copy /usr/share/pilot-link/udev/60-libipsock.rules > >>> into /etc/udev/rules.d > >>> > >> Did this > >> > >>> Do tail -f /var/log/messages and press the sync button on the Palm - > >>> see which device is created. Point J-pilot to the device (mine was > >>> /dev/ttyUSB0) in preferences. > >>> > >> Did this too. Here's the log. It didn't resolve my problem; still can't > >> connect using J-Pilot. > >> > >> > > <--------------------[ Snip listing ]-------------------> > > > > Depending on the model your Palm is, you may need to use > > /dev/ttyUSB0 or /dev/ttyUSB1. It doesn't look like > > 60-libipsock.rules create the pilot symlink. I am not sure if it is > > created in another rule in F7. It was in F6, but it pointed to the > > wrong port for me... > > > > Mikkel > > > I have a little Palm Z22 that works fine with Windows but I think it has > never worked with Linux. No data to solve a problem. Yesterday I plugged > it in and nothing happened. Then I found the tab for Palm devices and > clicked that. Went through several windows and then it just died. > > Karl > I also have a Z22. Mine works OK with the installed system over USB. It didn't work too well over the USB switch, though, so I just used the one open port and plugged it in there. I don't remember doing anything special to set it up, just loaded the software and it ran the setup script and set it up and got it running. I am still on FC6 though. Regards, Les H Regards, Les H -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
