Thom Paine wrote: > I have a small network that is 10.10.10.x and I have a few PLC devices > that I'd like to be able to talk to that are on a 192.168.0.x segment. > > Can I put some sort of a route statement into my fedora server that > will link these two so that I can talk to the 192 devices from my pc > on my 10 network? I use my fedora box as my router and dhcp server. > > Thanks. > One way is to add a route to the 192.168.0.x network through the same interface as the 10.10.10.x network. Something like: route add -net 192.168.0.0 eth0 or route add -net 192.168.0.0 dev eth0 You can have the route added automatically by creating a /etc/sysconfig/network-scripts/route-<interface-name> file with the route. I used it with the old format of: 192.168.0.0/24 dev eth0 I am not sure, but I think the new format would be: ADDRESS0=192.168.0.0 NETMASK0=255.255.255.0 or ADDRESS0=192.168.0.0 NETMASK0=255.255.255.0 GATEWAY0=10.10.10.x Remember, your machine does not need an IP address in the network range you are trying to talk to. You just need to know how to get to that network. (Without adding the specific route, your computer would try to use the default route.) You may also have to open a hole in your firewall for the 192.168.0.0 network, depending on your setup. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
