On 6/27/07, David Katz <david@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
I think you have identified at least part of my problem: ifconfig says that my workstation is 192.168.1.2. To match my router's settings, I need it to be 192.168.1.140. Can I just: ifconfig eth0 192.168.1.140 ? Thanks much!
man ifconfig is your best help on that one. I typically configure it via the GUI. What you have is right except you don't have a subnet mask or default gateway included. Best to log onto your router and configure it from there as was explained by someone else and as I noted in my initial posting. If you are going to statically assign it within Fedora, you have to make sure that it's an IP that the router will not assign via DHCP to another machine on the network. Otherwise you'll have two machines with the same IP. Hence you either configure the router to assign a static IP to MAC (whatever the MAC is for the machine in question), or set it via Fedora and ensure that DHCP on the router is set up with a range of IPs that does not contain the static IP you set on your machine. In other words if you set your machine to 192.168.1.140, ensure the DHCP server only allocates 192.168.1.100 to 192.168.1.120 for example. So 140 doesn't get allocated to a second machine on your network. Jacques B. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
