Jeff Mutonho wrote:
On 3/21/07, Brad Bonkoski <bbonkoski@xxxxxxxxxxxxxx> wrote:
Jeff Mutonho wrote:
> On 3/21/07, Robert P. J. Day <rpjday@xxxxxxxxxxxxxx> wrote:
>> On Wed, 21 Mar 2007, Jeff Mutonho wrote:
>>
>> > On 3/20/07, alan <alan@xxxxxxxxxxxxxx> wrote:
>> > > On Tue, 20 Mar 2007, Phil Meyer wrote:
>> > >
>> > > > Jeff Mutonho wrote:
>> > > >> I got the message "Nothing to be done for bzImage..."
during an
>> > > >> attempt to do a kernel rebuild on an FC6 machine.This happened
>> when I
>> > > >> tried to do a "make bzImage"
>> > > >>
>> > > >> Thereafter "make install' failed with a message saying
>> something about
>> > > >> "vmlinuz" missing.
>> > > >> What could be the problem?
>> > > >>
>> > > >>
>> > > >>
>> > > > There is a file called README in the top level of the kernel
>> sources.
>> > > >
>> > > > % grep make README
>> > > >
>> > > > always shows the same sequence for building a kernel
>> > > >
>> > > > make mrproper or make oldconfig
>> > > > make (choose configurator)
>> > > > make
>> > > > sudo make modules_install install
>> > > >
>> > > > Examination of the makefile should show that there is not a
>> target called
>> > > > bzImage.
>> > >
>> > > But there used to be. Sounds like someone either has old
>> instructions or
>> > > has not upgraded their memories on kernel building.
>>
>> once again, the "bzImage" target is not a generic kernel-building
>> target, it is i386-specific, which is why it can be found in
>> arch/i386/boot/Makefile and not in the top-level Makefile.
>>
>> it most definitely *does* exist. simply typing "make bzImage" should
>> have established that. "make help" would have demonstrated it as
>> well.
>>
>> rday
>> --
>
> Ok I read the README file and i've done the 'make' , 'make
> modules_install install' .A new kernel image was created as seen from
> the last part of the log:
> =========================================================
> if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> System.map 2.6.18-build-1; fi
> mkdir -p /boot
> ln -f -s vmlinuz-2.6.18-build-1 /boot/vmlinuz-2.6.18
> rm -f /boot/vmlinuz-2.6.18-build-1
> install -m0644 vmlinuz /boot/vmlinuz-2.6.18-build-1
> install -m0644 vmlinux /boot/vmlinux-syms-2.6.18-build-1
> install -m0664 .config /boot/config-2.6.18-build-1
> install -m0664 System.map /boot/System.map-2.6.18-build-1
> ln -f -s vmlinuz-2.6.18-build-1 /boot/vmlinuz-2.6
> ====================================================================
>
> What extra step(s) do I need to do ?My grub.conf file still looks the
> same as before (i.e does not show an entry for the new kernel).Isn't
> it suppose to be updated automatically?
I suspect there are way too many boot loaders for the kernel install
process to make changes to this...
Just copy & paste your current entry, rename it something different, and
update the file names of the kernel image and initrd (if needed)
-B
Hmmm.My current grub.conf looks as follows :
title Fedora Core (2.6.18-1.2798.fc6xen)
root (hd1,0)
kernel /xen.gz-2.6.18-1.2798.fc6
module /vmlinuz-2.6.18-1.2798.fc6xen ro root=/dev/VolGroup00/LogVol00
rhgb quiet
module /initrd-2.6.18-1.2798.fc6xen.img
Now to create an entry to for the new kernel , I would have to add the
following entry :
Now you're learning about grub... ;-)
More here: http://www.gnu.org/software/grub/manual/html_node/
Try this:
title Fedora Core (2.6.18-build-1)
root (hd1,0)
kernel /vmlinuz-2.6.18-build-1 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
if you build with initrd you will need the following too:
initrd /name_of_initrd.img
Although I suspect you do not have this....
title Fedora Core (2.6.18-build-1)
root (hd1,0)
kernel /xen.gz-2.6.18-1.2798.fc6
module /vmlinuz-2.6.18-build-1 ro root=/dev/VolGroup00/LogVol00
rhgb quiet
module /initrd-2.6.18-1.2798.fc6xen.img
but in there doesn't seem to be the corresponding files for the entries
kernel /xen.gz-2.6.18-1.2798.fc6 and
module /initrd-2.6.18-1.2798.fc6xen.img
in my /boot directory.
"Don't take the name of root in vain."
Jeff Mutonho
Cape Town
South Africa
GoogleTalk : ejbengine
Skype : ejbengine
Registered Linux user number 366042
