On Thu, Mar 15, 2007 at 02:03:45PM +0100, Jim van Wel wrote:
> > On Thu, Mar 15, 2007 at 11:42:44AM +0000, Eur Ing Chris Green wrote:
> >> On Thu, Mar 15, 2007 at 12:35:52PM +0100, Jim van Wel wrote:
> >> > Hi there,
> >> >
> >> > > debug3: Not a RSA1 key file /home/chris/.ssh/id_rsa.
> >> > > debug2: key_type_from_name: unknown key type '-----BEGIN'
> >> >
> >> > Your rsa_key is not alright? Are you working with SSH keys?
> >> >
> >> I was wondering what that was about too. The odd thing is that it
> >> appears to work, if I remove my /home/chris/.ssh/id_rsa file (well,
> >> rename it) then when I use ssh the remote hosts ask for my password.
> >>
> >> Maybe I'll try regenerating all my keys, those ones are quite old.
> >>
> > It makes no difference, I still get all that stuff (in debug) about
> > "Not a RSA1 key file /home/chris/.ssh/id_rsa", all my ssh logins do
> > the same but they all work OK except one.
> >
> Can you post your sshd_config here? Maybe some strange line somewhere. How
> did you generated the keys? Looks like the SSH-RSA is not working right.
> It needs to parse your public key, and it is not doing this at this
> moment.
>
I generated my keys by saying "ssh_keygen" and accepted the default
file name.
It's an absolutely default ssh_config as far as I can see:-
# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes>
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
Host *
GSSAPIAuthentication yes
# If this option is set to yes then remote X11 clients will have full access
# to the original X11 display. As virtually no X11 client supports the untrusted
# mode correctly we set this to yes.
ForwardX11Trusted yes
# Send locale-related environment variables
SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESS>
SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
SendEnv LC_IDENTIFICATION LC_ALL
--
Chris Green
