This also happened to me. I was to lazy to find a script. I just switched the cables. :) On 3/9/07, Steve Friedman <steve@xxxxxxxxxxx> wrote:
On Fri, 9 Mar 2007, Mikkel L. Ellertson wrote: > Bob wrote: >> Hi there, >> >> I have a fedora 5 system with the latest updates. This machine has three >> network adapters, each of which uses a different hardware driver. >> >> When I first boot, the eth0 and eth2 interfaces are logically attached to >> the wrong controllers. In /var/log/dmesg, the Realtek controller is loaded >> first, and attaches to eth0 and the 3Com controller loads last and attaches >> to eth2. If I stop the network service, remove the 3c59x and 8139too >> modules and restart the network, things get configured correctly. Is there >> a way to get things to work right when first booted? >> > You can try editing the /etc/sysconfig/network-scripts/ifcfg-eth? > files and make sure the HWADDR= lines have the correct MAC address > for the interfaces you want. > If you are lazy: http://linux.dell.com/files/name_eths/name_eths-0.4.tar.gz will also ensure that the assignment is such that the LAN(s) on Motherboard are assigned before cards and all are assigned in a consistent order. Steve Friedman -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
