Re: Problem installing Fedora

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tod, from network or CD, yes, another other hard drive not quite since I don't
have more disks to use in this case. I wouldn't mind using any distro that would have correct
drivers loaded at boot installation time. When this type of problems happen I usually use debian
netinstall cd images that have the drivers I need, but in this case I haven't found one, maybe I'll do one,
but as I said it seems the drivers are outdated.
 
I'm already using vmware for functionality testing purposes. After my first post I was able to install FC6 on VMware.
I used LSI Logic instead of Bus Logic for the scsi hard drive on VMware and it worked.
 
And i'm pretty sure that Fedora Core is detecting the raid0 hard drive, the problem is that when the installer gets to the partitioning fase it says "would like to initialize your hard disk"? So I'm guessing if I say yes I will loose the windows XP partition, which I don't wan't to do.
 
I have used dual boot system's for the past 7 years with no problem. I never had that type of problems.
 
Orlando
 
On 2/12/07, Tod Merley <todbot88@xxxxxxxxx> wrote:
Hi Orlando!

I hope they do as well.

Other things to consider:

- Would it be good to boot linux from CD, network, or another HD?  All
are possible.
- Do you need a dual enviornment - possible through Vmware and others?
- Would it be better to add another machine to the mix?  I do believe
it would be simpler and probably more secure/reliable.

Mixing the Microsoft and Linux enviornments can create a lot of
problems.  For example, lets say you use the supplied GRUB bootloader
as your operating system selection tool.  Some Microsoft security
enviornments will check the Master Boot Record, see that it is not
thiers, and correct that for you probably in a way which does not
immediately enable a path to Linux.

Good Hunting (and much Patience),

Tod

On 2/12/07, Orlando Reis < reis.orlando@xxxxxxxxx> wrote:
> Hi Tod, and thanks for the answer, I was hopping someone had a simpler one
> but I will do what you said.
>
> Orlando
>
> On 2/12/07, Tod Merley < todbot88@xxxxxxxxx> wrote:
> > Hi Orlando!
> >
> > I cannot answer this but may be able to point you in a direction which
> will.
> >
> > When linux boots the bootloader (first sector) loads a "second stage
> > (sometimes stage 1.5) which contains enough information to talk with
> > the disk system.  Probably this part goes ok (you do need to consider
> > that when you do load linux on the hard drive you will either need to
> > use it's supplied GRUB bootloader and point it to your XP installation
> > or use the XP bootloader and point it to linux - definitely spend some
> > time googling "Linux XP dual boot").
> >
> > It then loads an small Kernel and associated RAM disk image into
> > memory and pivots control to there.  In order for this to work the RAM
> > disk image must have the drivers for your raid system included.
> > Google "linux RAM disk image driver" possible with the specifics of
> > your hardware and you may well get to where you need to be.
> >
> > Good Hunting!
> >
> > Tod
> >
> > On 2/12/07, Orlando Reis <reis.orlando@xxxxxxxxx> wrote:
> > > Hi, I'm having some problems installing Fedora Core 6 on a ULI based
> raid0
> > > host.
> > >
> > > Someone told me that the drivers where outdated and not working, that
> this
> > > was the reason for not being able
> > > to see my raid0 unit when installing?
> > >
> > > This is driving me nuts. I can't install to hardware but i also can't
> > > install it using vmware which doesn't make any sense at all :(
> > >
> > > Motherboard asusp5rd2-vm AliM5229 with uli M1575 raid.
> > >
> > > 2*80G Segate Sata 2 hard disks
> > >
> > > Raid is enabled on BIOS and I currently have XP working on the first
> > > partition with 90G.
> > >
> > > I tried in vain to go to ULI web page and check for drivers but those
> that
> > > are there also outdated. As anyone else had a similiar problem?
> > >
> > > Orlando
> > > --
> > > fedora-list mailing list
> > > fedora-list@xxxxxxxxxx
> > > To unsubscribe:
> > > https://www.redhat.com/mailman/listinfo/fedora-list
> > >
> >
> > --
> > fedora-list mailing list
> > fedora-list@xxxxxxxxxx
> > To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-list
> >
>
>
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-list
>

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux