On 30/01/07, Philip Walden <pwaldenlinux@xxxxxxxxxxx> wrote:
Philip Walden wrote: > Dotan Cohen wrote: >> On a recent Dell laptop, what would cause DVD playback to be very >> choppy? > Besides the ATA DMA stuff, you may also want to check whether your > MTRR is being set properly by the xorg X server. > > Mine looks like this: > > cat /proc/mtrr > reg00: base=0x00100000 ( 1MB), size= 256MB: write-back, count=1 > reg01: base=0xfc000000 (4032MB), size= 32MB: write-combining, count=1 > > You should have at least one "write-combining" entry which means the > graphics card is set properly. Otherwise, performance can drop > dramatically. Here is a howto: http://www.faqs.org/docs/Linux-HOWTO/DVD-HOWTO.html#ss6.1
Thanks. I've nothing in /proc/mtrr: [root@localhost ~]# ls /proc/mtrr /proc/mtrr [root@localhost ~]# However, I'm having a hard time starting X, as it's already running! I've combed the logs in /var/logs but I don't have those lines. When I kill X with CTRL-ALT-ESC it starts right back up automatically, not letting me redirect it's output to a file. Googleing the mtrr led me to this page: http://www.mplayerhq.hu/DOCS/HTML/en/mtrr.html Where they suggest that the info can be retrieved from dmesg. I can't find it, maybe someone here can: [root@localhost ~]# dmesg Linux version 2.6.19-1.2895.fc6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:28:18 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007fed3400 (usable) BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 523987) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 523987 early_node_map[1] active PFN ranges 0: 0 -> 523987 On node 0 totalpages: 523987 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292310 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fc1d0 ACPI: RSDT (v001 DELL M07 0x27d60b11 ASL 0x00000061) @ 0x7fed39cd ACPI: FADT (v001 DELL M07 0x27d60b11 ASL 0x00000061) @ 0x7fed4800 ACPI: HPET (v001 DELL M07 0x00000001 ASL 0x00000061) @ 0x7fed4f00 ACPI: MADT (v001 DELL M07 0x27d60b11 ASL 0x00000047) @ 0x7fed5000 ACPI: MCFG (v016 DELL M07 0x27d60b11 ASL 0x00000061) @ 0x7fed4fc0 ACPI: SLIC (v001 DELL M07 0x27d60b11 ASL 0x00000061) @ 0x7fed509c ACPI: BOOT (v001 DELL M07 0x27d60b11 ASL 0x00000061) @ 0x7fed4bc0 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fed3a0d ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) Detected 1995.059 MHz processor. Built 1 zonelists. Total pages: 519894 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet hdc=noprobe ide_setup: hdc=noprobe mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0808000 soft=c07e8000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070240k/2095948k available (2210k kernel code, 24404k reserved, 1135k data, 244k init, 1178444k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc07a6000 - 0xc07e3000 ( 244 kB) .data : 0xc0628bff - 0xc07448f4 (1135 kB) .text : 0xc0400000 - 0xc0628bff (2210 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 3993.42 BogoMIPS (lpj=1996713) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0809000 soft=c07e9000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995004) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 Total of 2 processors activated (7983.43 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: CPU#0 had -970907 usecs TSC skew, fixed it up. CPU#1 had 970907 usecs TSC skew, fixed it up. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes sizeof(dentry)=144 bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=172 bytes sizeof(task_struct)=1376 bytes migration_cost=32 checking if image is initramfs... it is Freeing initrd memory: 2255k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1080-10bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4 ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved pnp: 00:02: ioport range 0x1008-0x100f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x1006-0x1007 has been reserved pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved pnp: 00:03: ioport range 0x1060-0x107f has been reserved pnp: 00:03: ioport range 0x1080-0x10bf has been reserved pnp: 00:03: ioport range 0x10c0-0x10df has been reserved pnp: 00:08: ioport range 0xc80-0xcff could not be reserved pnp: 00:08: ioport range 0x910-0x91f has been reserved pnp: 00:08: ioport range 0x920-0x92f has been reserved pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved pnp: 00:08: ioport range 0x930-0x97f has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: efd00000-efefffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: efc00000-efcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: d000-dfff MEM window: efa00000-efbfffff PREFETCH window: e0000000-e01fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: ef900000-ef9fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x79 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1170103557.821:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key A803A00FB8A89D68 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM] (45 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdd: IRQ probe failed (0xfffffcfe) hdd: IRQ probe failed (0xfffffcfe) Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 244k freed Write protecting the kernel read-only data: 416k Time: tsc clocksource has been installed. Time: hpet clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb 2-1: new low speed USB device using uhci_hcd and address 2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.00: configured for UDMA/133 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 usb 2-1: new low speed USB device using uhci_hcd and address 3 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST980825AS 8.04 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda usb 2-1: configuration #1 chosen from 1 choice scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@xxxxxxxxxx input: HID 1241:1177 as /class/input/input2 input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1 usb 4-2: new full speed USB device using uhci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 4-2: configuration #1 chosen from 1 choice security: 3 users, 6 roles, 1586 types, 172 bools, 1 sens, 1024 cats security: 59 classes, 49636 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1170103563.493:2): policy loaded auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> ieee1394: Initialized config rom entry `ip1394' input: PC Speaker as /class/input/input3 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19) ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 mmc0: SDHCI at 0xef9fd400 irq 23 DMA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22 eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:c8:13:d1 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb Floppy drive(s): fd0 is 1.44M intel_rng: FWH not detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 22 ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0b:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection sr0: scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[334fc00004361961] floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found sonypi: Sony Programmable I/O Controller Driver v1.26. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ibm_acpi: ec object not found ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-1, type ext3), uses xattr Adding 3047416k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:3047416k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: no IPv6 routers present UDF-fs: Partition marked readonly; forcing readonly mount UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Black_hawk', timestamp 2036/02/07 03:58 (1078) SELinux: initialized (dev sr0, type udf), uses genfs_contexts audit(1170103777.355:3): avc: denied { execmod } for pid=4712 comm="swiftfox-bin" name="libxpcom_compat.so" dev=dm-0 ino=1371228 scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:object_r:usr_t:s0 tclass=file UDF-fs: Partition marked readonly; forcing readonly mount UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Black_hawk', timestamp 2036/02/07 03:58 (1078) SELinux: initialized (dev sr0, type udf), uses genfs_contexts ACPI: PCI interrupt for device 0000:0b:00.0 disabled ieee80211_crypt: unregistered algorithm 'NULL' ieee1394: Node removed: ID:BUS[0-00:1023] GUID[334fc00004361961] Disabling non-boot CPUs ... Breaking affinity for irq 1 Breaking affinity for irq 12 Breaking affinity for irq 14 Breaking affinity for irq 19 Breaking affinity for irq 21 Breaking affinity for irq 22 CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Stopping tasks: ==========================================================================================================| Shrinking memory... done (222800 pages freed) Suspending console(s) ACPI: PCI interrupt for device 0000:03:01.1 disabled ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled ACPI: PCI interrupt for device 0000:00:1b.0 disabled .............................. swsusp: Need to copy 67413 pages Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. swsusp: Restoring Highmem PCI: Setting latency timer of device 0000:00:01.0 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Setting latency timer of device 0000:00:1f.2 to 64 PM: Writing back config space on device 0000:0b:00.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23 pnp: Device 00:04 does not support activation. pnp: Device 00:05 does not support activation. usbdev2.3_ep00: PM: resume from 0, parent 2-1 still 1 usbhid 2-1:1.0: PM: resume from 1, parent 2-1 still 1 usbdev2.3_ep81: PM: resume from 0, parent 2-1:1.0 still 1 usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 1 hci_usb 4-2:1.0: PM: resume from 1, parent 4-2 still 1 usbdev4.2_ep81: PM: resume from 0, parent 4-2:1.0 still 1 usbdev4.2_ep82: PM: resume from 0, parent 4-2:1.0 still 1 usbdev4.2_ep02: PM: resume from 0, parent 4-2:1.0 still 1 hci_usb 4-2:1.1: PM: resume from 1, parent 4-2 still 1 usb 4-2:1.2: PM: resume from 1, parent 4-2 still 1 usbdev4.2_ep84: PM: resume from 0, parent 4-2:1.2 still 1 usbdev4.2_ep04: PM: resume from 0, parent 4-2:1.2 still 1 usb 4-2:1.3: PM: resume from 1, parent 4-2 still 1 usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.1 still 1 usbdev4.2_ep03: PM: resume from 0, parent 4-2:1.1 still 1 hci0: PM: resume from 0, parent 4-2:1.0 still 1 Restarting tasks...<6>usb 2-1: USB disconnect, address 3 done Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0809000 soft=c07e9000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995019) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 CPU1 is up usb 4-2: USB disconnect, address 2 ata1.00: configured for UDMA/133 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata2.00: configured for UDMA/33 usb 2-1: new low speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice input: HID 1241:1177 as /class/input/input4 input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.1-1 usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ieee1394: Initialized config rom entry `ip1394' ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4] Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0b:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection ADDRCONF(NETDEV_UP): eth0: link is not ready ieee1394: Host added: ID:BUS[0-00:1023] GUID[334fc00004361961] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) ADDRCONF(NETDEV_UP): eth1: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present UDF-fs: Partition marked readonly; forcing readonly mount UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Black_hawk', timestamp 2036/02/07 03:58 (1078) SELinux: initialized (dev sr0, type udf), uses genfs_contexts sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 18704 Buffer I/O error on device sr0, logical block 2338 Buffer I/O error on device sr0, logical block 2339 Buffer I/O error on device sr0, logical block 2340 Buffer I/O error on device sr0, logical block 2341 Buffer I/O error on device sr0, logical block 2342 Buffer I/O error on device sr0, logical block 2343 Buffer I/O error on device sr0, logical block 2344 Buffer I/O error on device sr0, logical block 2345 Buffer I/O error on device sr0, logical block 2346 Buffer I/O error on device sr0, logical block 2347 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 18960 printk: 22 messages suppressed. Buffer I/O error on device sr0, logical block 2370 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 11024 printk: 31 messages suppressed. Buffer I/O error on device sr0, logical block 1378 Buffer I/O error on device sr0, logical block 1379 Buffer I/O error on device sr0, logical block 1380 Buffer I/O error on device sr0, logical block 1381 Buffer I/O error on device sr0, logical block 1382 Buffer I/O error on device sr0, logical block 1383 Buffer I/O error on device sr0, logical block 1384 Buffer I/O error on device sr0, logical block 1385 Buffer I/O error on device sr0, logical block 1386 Buffer I/O error on device sr0, logical block 1387 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 11280 printk: 22 messages suppressed. Buffer I/O error on device sr0, logical block 1410 UDF-fs: Partition marked readonly; forcing readonly mount UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'THE_WHOLE_NINE_YARDS', timestamp 2000/05/12 19:33 (1078) SELinux: initialized (dev sr0, type udf), uses genfs_contexts sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 7080 printk: 31 messages suppressed. Buffer I/O error on device sr0, logical block 1770 Buffer I/O error on device sr0, logical block 1771 Buffer I/O error on device sr0, logical block 1772 Buffer I/O error on device sr0, logical block 1773 Buffer I/O error on device sr0, logical block 1774 Buffer I/O error on device sr0, logical block 1775 Buffer I/O error on device sr0, logical block 1776 Buffer I/O error on device sr0, logical block 1777 Buffer I/O error on device sr0, logical block 1778 Buffer I/O error on device sr0, logical block 1779 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 22616 printk: 54 messages suppressed. Buffer I/O error on device sr0, logical block 5654 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 22616 printk: 1 messages suppressed. Buffer I/O error on device sr0, logical block 5654 Buffer I/O error on device sr0, logical block 5655 sr 1:0:0:0: SCSI error: return code = 0x08000002 sr0: Current: sense key: Hardware Error Additional sense: Timeout on logical unit end_request: I/O error, dev sr0, sector 22616 Buffer I/O error on device sr0, logical block 5654 Buffer I/O error on device sr0, logical block 5655 Just for kicks, here's the output of "lspci -v" as suggested by the same page: [root@localhost ~]# lspci -v 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: Dell Unknown device 01bd Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: efd00000-efefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000 Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Dell Unknown device 01bd Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Memory behind bridge: efc00000-efcfffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efa00000-efbfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e0100000 Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at bf80 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at bf60 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at bf40 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at bf20 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: ef900000-ef9fffff Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master]) Subsystem: Dell Unknown device 01bd Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at bfa0 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Dell Unknown device 01bd Flags: medium devsel, IRQ 22 I/O ports at 10c0 [size=32] 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA]) Subsystem: Dell Unknown device 2003 Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at ee00 [size=256] Memory at efdf0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at efd00000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Capabilities: [58] Express Legacy Endpoint IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Unknown device 01af Flags: bus master, fast devsel, latency 64, IRQ 22 Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10 [OHCI]) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 64, IRQ 17 Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 03:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 64, IRQ 23 Memory at ef9fd400 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01) Subsystem: Dell Unknown device 01bd Flags: bus master, medium devsel, latency 0, IRQ 9 Memory at ef9fd500 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) Subsystem: Dell Unknown device 01bd Flags: medium devsel, IRQ 9 Memory at ef9fd600 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Subsystem: Dell Unknown device 01bd Flags: medium devsel, IRQ 9 Memory at ef9fd700 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) Subsystem: Intel Corporation Unknown device 1020 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at efcff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 34-c7-98-ff-ff-de-18-00 Thanks for all the assistance. I hope that we can get this going! Dotan Cohen http://dotancohen.com/gallery/index.html http://lyricslist.com/lyrics/artist_albums/471/taylor_james.html
