On Thu, 2007-01-25 at 09:31 +0000, Andy Green wrote:
> Naoki wrote:
>
> > # ethtool eth0
> > Settings for eth0:
> > Link detected: yes
>
> Try mii-tool eth0 instead,maybe it can do better (or worse :-) ).
Ya. First thing I tried, something wrong here for sure :
# mii-tool
SIOCGMIIPHY on 'eth0' failed: Operation not supported
eth1: no autonegotiation, 100baseTx-HD, link ok
Although, booting to a non-xen kernel fixes it :
# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Half
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
Linux 2.6.19-1.2895.fc6 is ok.
