Re: nvidia drivers worth installing?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

It is almost immediate. Also, it gets worse when i have both Firefox and
Thunderbird running. Here is my xorg.conf file.

Thanks

Srikanth


# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Sep 14
15:50:24 PDT 2006
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
	ModulePath   "/usr/lib/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib/xorg/modules"
	ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "fbdevhw"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "glx"
	Load  "dbe"
	Load  "extmod"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
    #HorizSync       29.0 - 55.0
    #VertRefresh     59.0 - 60.0
	#ModeLine     "1440x900@60" 99.9 1440 1472 1800 1832 900 901 907 909
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1440x900"
	ModeLine     "1400x900_60.00" 104.2 1400 1480 1632 1864 900 901 904 932
- -hsync +vsync
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "nVidia Corporation C51 PCI Express Bridge"
	Option	    "HWCursor" "on"
	#Option	    "AllowGLXWithComposite" "True"
	Option	    "AddARGBGLXVisuals" "True"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	Option	    "HWCursor" "on"
	Option	    "AddARGBGLXVisuals" "True"
	Option	    "DisableGLXRootClipping" "True"
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1440x900" "1280x800"
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "Enable"
	Option	    "RENDER" "Enable"
	Option	    "DAMAGE" "Enable"
	Option	    "XFIXES" "Enable"
EndSection



Lonni J Friedman wrote:
> On 1/24/07, Srikanth Konjarla <srikanth.konjarla@xxxxxxxxx> wrote:
>> I have recently updated nVidia driver (livna rpm x86_64 Kernel Module
>> 1.0-9746 , Dual Core AMD X2) on FC6 hoping to see some improvement in
>> performance with Beryl. But, unfortunately i could not find any
>> improvements in that area. I have been running into the issue where Xorg
>> would go nuts with CPU when Beryl is running. So, i have disabled the
>> Beryl. Here is what lspci tells me about my graphics card.
>>
>> 00:05.0 VGA compatible controller: nVidia Corporation C51 PCI Express
>> Bridge (rev a2) (prog-if 00 [VGA])
>>
>> Wondering if the issue is purely related to nVidia's driver (C51 PCI
>> Express Bridge) or it is the combination of Beryl and nVidia.
> 
> Is Xorg hitting the CPU immediately, or over time?  Posting your X log
> would be useful.
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFt5964QCEM551HXARAg6qAJwPJ9bHBHV7c7bLzuHATCo3aPAimACfS/15
FYmJWVBkA+vWL0uyAM9rgSs=
=pNUA
-----END PGP SIGNATURE-----

[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux