Dear list,
Sendmail service is now enabled, with simple check
[olivares@localhost ~]$ su -
Password:
[root@localhost ~]# service sendmail status
sendmail (pid 2066 2057) is running...
Yet, when I run ./machine-update -m to send the
machine's information to Linux counter I get the
message
[olivares@localhost Documents]$ ./machine-update -i
Here you can specify some info that the script can't
know for itself
Your Linux Counter reg#, if any [381662]:
Your machine's counter reg#, if any [340340]:
--------------------------------------------------------
This is what will be sent to the Linux Counter if you
run the program with the -m switch. Now, NOTHING IS
SENT
--------------------------------------------------------
From: olivares
To: machine-registration@xxxxxxxxxxxxxx
Subject: machine-update for localhost.localdomain
Mail program that sent this email: /bin/mail
//MACHINE
accounts: 1
cpu_uname: i686
kcoresize: 469700608
kernel: 2.6.18-1.2849.fc6
key: 340340
mailer: sendmail
method: machine-update version 0.29
name: localhost.localdomain
os: Linux
owner: 381662
uniqueid: 191476432
uptime_1: 16:46:42 up 37 min, 2 users, load
average: 0.82, 0.67, 0.50
uptime_2: runlevel (to lvl 5) Sun
Jan 14 16:09 - 16:46 (00:37)
users: 0
//END
//FILE /proc/meminfo
MemTotal: 450144 kB
MemFree: 46940 kB
Buffers: 8984 kB
Cached: 194536 kB
SwapCached: 0 kB
Active: 261484 kB
Inactive: 77656 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 450144 kB
LowFree: 46940 kB
SwapTotal: 1857288 kB
SwapFree: 1857288 kB
Dirty: 340 kB
Writeback: 0 kB
AnonPages: 135616 kB
Mapped: 65444 kB
Slab: 19424 kB
PageTables: 4252 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 2082360 kB
Committed_AS: 538912 kB
VmallocTotal: 573432 kB
VmallocUsed: 6292 kB
VmallocChunk: 566588 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
Hugepagesize: 4096 kB
//EOF
//FILE /etc/redhat-release
Fedora Core release 6 (Zod)
//EOF
//FILE df -T
Filesystem Type 1K-blocks Used Available
Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
ext3 14093368 6414068 6951852
48% /
/dev/hda5 ext3 101086 16022 79845
17% /boot
tmpfs tmpfs 225072 0 225072
0% /dev/shm
//EOF
//FILE /proc/version
Linux version 2.6.18-1.2849.fc6
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version
4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10
12:45:28 EST 2006
//EOF
//FILE /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-1.2849.fc6 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:10.4
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-1.2849.fc6 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-1.2849.fc6 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-1.2849.fc6 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-1.2849.fc6 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
//EOF
//FILE /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2700+
stepping : 1
cpu MHz : 2158.200
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8
apic mtrr pge mca cmov pat pse36 mmx fxsr sse syscall
mmxext 3dnowext 3dnow up ts
bogomips : 4319.25
//EOF
[olivares@localhost Documents]$ ./machine-update -m
[olivares@localhost Documents]$
/home/olivares/dead.letter... Saved message in
/home/olivares/dead.letter
[olivares@localhost Documents]$
I do not know how to fix this issue. Two of my other
machines are updated and machine-update script works.
Yet on this and another machine, it does not want to
work.
Thanks for helping,
Antonio
____________________________________________________________________________________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL
