Hi List, I manage to resolve this issue. I don't know how! what I did is reinstalled FC6 with Feodra Extras selected. I think there is some update on Savage driver in Fedora Extras. Cheers! Thanks and best regards, Rajesh ----- Original Message ----- From: rajesh.padalia@xxxxxxxxxxxx Date: Friday, January 5, 2007 10:22 am Subject: FC6: No display on screen; Savage Video Card > Hi List, > > I just installed FC6 on my old computer. everything was fine until > I rebooted computer. I did install in graphic mode. My S3 Savage4 > video card (32MB RAM) and Benq FP767-12 LCD Monitor were correctly > identified. However on boot display is going blank. > > I tried Xorg -configure, which generated attached file, however > did not resolve issue. > Attached below are Xorg.conf and Xorg.0.log: (last few lines). > Please let me know if any one wnat to see full log file. > I would appreciate help from list. > > Thanks... > > Rajesh > ==================================== > xorg.conf: > ---------- > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/share/X11/rgb" > ModulePath "/usr/lib/xorg/modules" > FontPath "unix/:7100" > FontPath "built-ins" > EndSection > > Section "Module" > Load "vnc" > Load "record" > Load "dbe" > Load "glx" > Load "xtrap" > Load "dri" > Load "extmod" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5 6 7" > EndSection > > Section "Monitor" > #DisplaySize 340 270 # mm > Identifier "Monitor0" > VendorName "BNQ" > ModelName "BenQ FP767-12" > ### Comment all HorizSync and VertSync values to use DDC: > HorizSync 31.0 - 83.0 > VertRefresh 56.0 - 76.0 > Option "DPMS" > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "HWCursor" # [<bool>] > #Option "SWCursor" # [<bool>] > #Option "ShadowFB" # [<bool>] > #Option "Rotate" # [<str>] > #Option "UseBIOS" # [<bool>] > #Option "LCDClock" # <freq> > #Option "ShadowStatus" # [<bool>] > #Option "CrtOnly" # [<bool>] > #Option "TvOn" # [<bool>] > #Option "PAL" # [<bool>] > #Option "ForceInit" # [<bool>] > #Option "Overlay" # [<str>] > #Option "TransparencyKey" # [<str>] > #Option "ForceInit" # [<bool>] > #Option "DisableXVMC" # [<bool>] > #Option "DisableTile" # [<bool>] > #Option "DisableCOB" # [<bool>] > #Option "DRI" # [<bool>] > #Option "BCIforXv" # [<bool>] > #Option "DVI" # [<bool>] > #Option "BusType" # [<str>] > #Option "DmaType" # [<str>] > #Option "DmaMode" # [<str>] > #Option "AGPMode" # <i> > #Option "AGPSize" # <i> > Identifier "Card0" > Driver "savage" > VendorName "S3 Inc." > BoardName "Savage 4" > BusID "PCI:1:0:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection > ==================================== > Xorg.0.log: (last few lines) > ----------------------------- > > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" > (II) Mouse0: ps2EnableDataReporting: succeeded > (II) SAVAGE(0): [drm] removed 1 reserved context for kernel > (II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xcfc4c000 at > 0xb7f67000FreeFontPath: FPE "unix/:7100" refcount is 2, should be > 1; fixing. > > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >
