Greetings; I have built and loaded the or51132 module which supposedly enables the reception of north american ATSC signals on a pcHDTV-3000 card. Unfortunately, neither tvtime nor kdetv acknowledge the capability, or its not properly installed with a simple 'modprobe or51132' statement. They both seem to work just fine with analog NTSC however. Presently I've been loading all those modules in my rc.local file, like this, since about 2.6.11 when all this was suddenly broken and it took this to get it working again: ---- modprobe -r cx88-dvb cx8802 cx8800 cx88-alsa cx88xx modprobe cx88xx tuner=60 modprobe cx8800 modprobe cx8802 modprobe cx88-dvb ---- And I've loaded the or51132 module from the cli since booting, but before calling either tvtime or kdetv. Do I need to modify the order of this, or if this isn't the correct methodology, what is the approved method? -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
