Yes, configuring client.conf on clients should not be necessary. Output from 'tcpdump udp port ipp' is: ....361410 IP xxx.xxx.xxx.xxx.ipp > 255.255.255.255.ipp: UDP, length 228 ....328707 IP xxx.xxx.xxx.xxx.ipp > 255.255.255.255.ipp: UDP, length 164 ... I've done some more tests and found that if I shutdown the firewall (I'm using Firestarter 1.0.3) installed on clients (FC5 & FC3) they are able to find all printers without changing client.conf. If I turn on firestarter after print discovery finishes, the client remains with all printers and is able to print. The strange thing is that clients with FC6 are also running Firestarter 1.0.3 and don't have any problems. NOTE: The above output is the same with or without Firestarter running. Manuel > On Wed, 2006-12-13 at 19:08 +0000, Manuel Monteiro wrote: > > The output is > > > > BrowseAllow from XXX.XXX.XXX.0/24 > > > > (XXX.XXX.XXX our domain) > > You shouldn't need to set ServerName; CUPS browsing should allow the > local CUPS server to become aware of the remote queues. > > Does 'tcpdump udp port ipp' (run on the client) show any browse packets > getting broadcast? > > Tim. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
