Re: Hard Drive Error Disk or Motherboard?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 21 November 2006 12:41, Paul Ward wrote:
>Thanks guys for the in depth knowledge of ide drives, I had no idea it
>made that much difference myself but then I guess that is why I am
>having problems.
>
>To throw some more information on the fault, as I said I ended up
>using my spare test drive with FC6, this has been a trooper and allows
>me to keep working.
>
>I decided to plug the troublesome drive into IDE1 as master, no other
>drives were connected and I had the same issues thus I thought proving
>the drive was playing up, but then I had the Idea of adding it as a
>master of IDE2 and using the test drive as the master IDE1, everything
>seems fine, I can mount the troublesome drive and see the data, I can
>even read and write to it???? Does this mean my IDE1 controller is at
>fault?? if so I guess it must be related to the chipsset / drive make?
>
That I dunno about, but I can relate that I have one box, with a 
Mach-Speed mobo in it, that flat doesn't like an attached /dev/hdb under 
any wireing circumstances.  If I hook up a drive as /dev/hdb, both drives 
will have trashed filesystems shortly.  But since its bulletproof with 
just the main drive, and an older dvd-rw as /dev/hdc, and its main job is 
to run my milling machine, thats how its running.  Kubuntu-6.06 on it, 
running an older HEAD of emc2.  Works fine.  In this case, and based on 
nearly 60 years of watching things electronic go bump in the night, my 
bet is on a buggy ide chipset.  I changed the drive cable twice, 
interchanged the drive twice and finally just gave up since even the 
smallest of those two drives was 20x what it needed to do its job.

Here's an lspci from that box:
root@shop:~# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset 
Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] 
(rev 74)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce 
FX 5200] (rev a1)
root@shop:~#

Do you have anything that matches the above list in your box?
                                                                                      
>On 21/11/06, Gene Heskett <gene.heskett@xxxxxxxxxxx> wrote:
>> On Tuesday 21 November 2006 09:41, Tim wrote:
>> >Tim:
>> >>> IDE/ATA doesn't use termination, SCSI does.
>> >
>> >Mel:
>> >> I don't believe that is true. I believe they both use termination.
>> >
>> >While from a technical standpoint, there's a standard impedance that
>> >loads the line, so it is "terminated".  There's nothing the user does
>> > to the drive that changes it.  So I should have said it doesn't have
>> > any user-set termination options.
>> >
>> >Electrically, it doesn't matter whether the master or slave is at the
>> >end of the line.  Neither's different in that regard.
>>
>> Yes it does, only the drive jumpered as a slave has this turned off. 
>> For that reason it should always be on the middle connector, with the
>> drive set as master on the end.  Yeah you can set it up bass-ackwards.
>>  And I'll say we told you so when your data gets fubared.
>>
>> --
>> Cheers, Gene
>> "There are four boxes to be used in defense of liberty:
>>  soap, ballot, jury, and ammo. Please use in that order."
>> -Ed Howdershelt (Author)
>> Yahoo.com and AOL/TW attorneys please note, additions to the above
>> message by Gene Heskett are:
>> Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
>>
>> --
>> fedora-list mailing list
>> fedora-list@xxxxxxxxxx
>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux