Your suggestion worked as advertised and the file system was relabeled.
Unfortunately that did not fix the problem......
Mal.
Unfortunately that did not fix the problem......
Mal.
----- Original Message ----
From: Tony Nelson <tonynelson@xxxxxxxxxxxxxxxxx>
To: fedora-list@xxxxxxxxxx
Sent: Saturday, November 11, 2006 12:53:48 PM
Subject: Re: Problem with Xen and SElinux (FC6).
From: Tony Nelson <tonynelson@xxxxxxxxxxxxxxxxx>
To: fedora-list@xxxxxxxxxx
Sent: Saturday, November 11, 2006 12:53:48 PM
Subject: Re: Problem with Xen and SElinux (FC6).
At 11:21 AM -0800 11/11/06, Malcolm Northcott wrote:
>I tried installing XEN while running SElinux in enforcing mode, probably
>not a good idea but....
>When I tried creating the first virtual machine (using virt-manager), I
>got an SELinux error flagged in setroubleshooter. I compounded my errors
>by applying the fix suggested in setroubshooter (basically relabelling
>the /lib directory if my memory serves). This generated about 70 more se
>errors before I could get to the ^C keys.
>Now on reboot I get the following error which pops me in to the fsck
>shell.
>
>/sbin/dmsetup error while loading shared libraries libdevmapper.so.1.0.2
>
>If I apply the grub option selinux=0 the system boots just fine, but of
>course selinux is disabled.
>
>I tried disabling selinux from the GUI, reboot, re-enable reboot. I was
>hoping the re-label on re-enable would fix the issue, but the system
>does not boot far enough to get to the relabeling phase.
>
>Can anyone tell me how to fix the selinux setup so that it can be
>re-enabled?
> Thanks,
> Mal.
>
>Im running a fully updated FC6 on Core 2 Duo 6600/Asus P5W motherboard,
>which works great except for having nothing in /proc/acpi/thermal_zone.
Touch /.autorelabel and boot with "enforcing=0".
If you have added a new policy module as part of the setroubleshooter fix,
you should remove it first.
--
____________________________________________________________________
TonyN.:' The Great Writ <mailto:tonynelson@xxxxxxxxxxxxxxxxx>
' is no more. <http://www.georgeanelson.com/>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>I tried installing XEN while running SElinux in enforcing mode, probably
>not a good idea but....
>When I tried creating the first virtual machine (using virt-manager), I
>got an SELinux error flagged in setroubleshooter. I compounded my errors
>by applying the fix suggested in setroubshooter (basically relabelling
>the /lib directory if my memory serves). This generated about 70 more se
>errors before I could get to the ^C keys.
>Now on reboot I get the following error which pops me in to the fsck
>shell.
>
>/sbin/dmsetup error while loading shared libraries libdevmapper.so.1.0.2
>
>If I apply the grub option selinux=0 the system boots just fine, but of
>course selinux is disabled.
>
>I tried disabling selinux from the GUI, reboot, re-enable reboot. I was
>hoping the re-label on re-enable would fix the issue, but the system
>does not boot far enough to get to the relabeling phase.
>
>Can anyone tell me how to fix the selinux setup so that it can be
>re-enabled?
> Thanks,
> Mal.
>
>Im running a fully updated FC6 on Core 2 Duo 6600/Asus P5W motherboard,
>which works great except for having nothing in /proc/acpi/thermal_zone.
Touch /.autorelabel and boot with "enforcing=0".
If you have added a new policy module as part of the setroubleshooter fix,
you should remove it first.
--
____________________________________________________________________
TonyN.:' The Great Writ <mailto:tonynelson@xxxxxxxxxxxxxxxxx>
' is no more. <http://www.georgeanelson.com/>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
