>Anne Wilson wrote: >> On Friday 10 November 2006 03:34, Jeffrey Ross wrote: >>> I'm running out of ideas so I'm turning back to the list for help, what >>> I have tried: >>> >>> 3 different SCSI cards (Adaptec 2940, 2940UA, and 29320A) >>> 3 different tape drives (2 DLT drives 20/40, 15/30, and an exabyte 8mm >>> 7/15) >>> >> I have stayed out of this thread as I don't know a great deal about scsi >> cards. What I do know, though, is that Adaptec are known for producing >> non-conforming scsi adapters. I found this out a long time ago, when trying >> to get scsi devices running under windows. If you have access to any other >> scsi card try replacing the Adaptec one. HTH > >I've used many different adaptec adapters with many >different DLT's on all sorts of versions of Fedora and Redhat. > >It has always Just Worked. > >- unless there has been a cable or termination problem. I missed the original post, but FWIW, I have had some trouble with Adaptec 29320's. I have a Jetstor RAID-array which wont operate beyond U160 when talking to Adaptec, but will run at U320 when talking to an LSI-Logic adapter. This is identified by the manufacturer as an Adaptec problem, to do with 16byte CRDB's when using large logical-block-addresses. I've also had problems with DLT2 tapedrives on these Adaptec adapters, whereby unless I write records > 64K, records get dropped. There is no problem with DLT1. I've not yet had the chance to try the DLT2 drive on the LSI adapter. Terry. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
