Philip Prindeville wrote:
I'm using a Dell L610 to run FC5 (updated), and it has an i915GM
controller,
which uses the i810 drivers...
I can't seem to configure it correctly (I've attached the config I'm
using). It
seems to have two issues.
(1) it probes for the monitor DDC sync values, which disagree with what
I've
explicitly configured, but looking at the Xorg.0.log file, it gives no
indication
of what the EDID actually said the values were (grrr... you can never
have too
much logging).
(2) it then complains that "1400x1050" isn't a known modeline (no mode of
this name), even though I've explicitly configured a modeline with that
exact setting.
and the second head (in this case, connected to a Dell 1704FPV via DVI
hanging off a port-replicator) never seems to light up.
I've attached both the config and the log file. If anyone has had luck
with
this, please let me know.
Thanks,
-Philip
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(==) I810(0): VideoRAM: 65536 kByte
Below it says to add a line due to a broken BIOS.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
It looks like it detected it as you wanted. It apparently does not see
the second CRT.
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1400,1050)
(II) I810(0): Display Info: CRT2 (second CRT): attached: FALSE, present: FALSE, size: (0,2063)
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1400 x 1050
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1400x1050
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(**) I810(0): Option "NoDDC" "true"
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte
Mode: 38 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc000723f
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 8
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xc0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 8
LinNumberOfImagePages: 8
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 49 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc000723f
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xc0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 58 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc000723f
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xc0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
(II) I810(0): Monitor0: Using hsync range of 31.50-90.00 kHz
(II) I810(0): Monitor0: Using vrefresh range of 59.00-75.00 Hz
(II) I810(0): Not using mode "1400x1050" (no mode of this name)
I didn't see the mode above either in the long scrolled information
from this log file that you attached. 1280x1024 were the maximum modes
listed.
(II) I810(0): Not using mode "1280x960" (no mode of this name)
(II) I810(0): Not using mode "1152x864" (no mode of this name)
(II) I810(0): Not using built-in mode "1280x1024" (width too large for virtual size)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(WW) I810(0): Successfully set original devices
(WW) I810(0): Setting the original video mode instead of restoring
the saved state
(WW) I810(0): Extended BIOS function 0x5f05 failed.
BIOS error?
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(II) I810(0): xf86UnbindGARTMemory: unbind key 7
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 3
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
(II) I810(0): xf86UnbindGARTMemory: unbind key 4
(II) I810(0): xf86UnbindGARTMemory: unbind key 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 6
(WW) I810(0): Successfully set original devices (2)
(II) Mouse0: ps2EnableDataReporting: succeeded
No help I know but trying to detect any problems by scanning the log.
Jim
--
You will be advanced socially, without any special effort on your part.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
