ive had this problem not only with my own acer, but with other laptops too... not all though, so i think its a problem with the definitions of acpi devices...
i have an acer tm 250 btw.
On 11/4/06, gary <garys@xxxxxxxxxxxxx> wrote:
On Fri, 2006-11-03 at 17:40 -0600, fedora-list@xxxxxxxxxxxxxx wrote:
> I've got a problem booting kernel-2.6.18-1.2200.fc5
>
> I'm using an eMachine T2240 system.
> CPU: CPU, CEL-2.2G/128K/F400,mPGA478,SL6RW CPEMIN100155
> CPU Fan Type: Fan, H/SINK:117162CBL01,MPGA,P4P-2.4G,W/
>
> (The above was collected from:
> http://parts.emachines.com/emachines/sys_lookup.asp )
>
> When I boot the 18-1.2200 kernel the CPU cooling fan power off as the
> words, "Uncompressing Linux Kernel....Ok booting kernel." appear on the
> screen.
>
> Prior to this kernel I've had a problem where the fan will power off when the
> CPU heats up too much. That still occurs with kernel-2.6.17-1.2187_FC5 and
> earlier. But now with kernel-2.6.18-1.2200.fc5 the fan powers off
> immediately at boot time.
>
> Is there something I can do to correct this problem. I'm admittedly not
> particularly knowledgeable in this area.
>
> Thank much for the help.
>
In order to troubleshoot this - you'll first need to determine if this
is or is not a hardware issue. Is the cpu shutting down because of
overheating?
If not, which kernel can you use without problem? Then compare the boot
up parameters - between the working and non-working kernels. Sometimes a
kernel may fail to load a module. Often you'll find that some kernels
will work better with your system than others. --------gary
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
--
Oliver Leitner
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
