Chris Mohler wrote:
Stating the obvious:
You should ensure that the machine is as dust-free as possible. Run
it with the case open and make sure all of the fans are running -
case, cpu, power supply, etc. The timing with the kernel upgrade
might be coincidental. The only way I can think of to check would be
to boot the previous kernel and see if symptoms persist.
Good luck,
Chris
You made me do it!
I rebooted again with the previous kernel ... 2187 ...
and the temperature indication appears normal 39.0, 39.5,
40.0, cycling a bit around 40°C rather than up to 45°C and
then the fan switching on to bring it back down.
Whatever the cause it's related to the "2200" kernel.
I don't know that it has much significance beyond a little
fan noise and it is a quiet fan, but it is telling me that
something works harder when the most recent kernel is used.
uname -a
Linux box1 2.6.17-1.2187_FC5 #1 Mon Sep 11 01:17:06 EDT 2006 i686 i686
i386 GNU/Linux
sensors
adm9240-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 7000
2.5V: +1.51 V (min = +0.00 V, max = +3.32 V)
Vccp1: +2.00 V (min = +0.00 V, max = +3.59 V)
3.3V: +3.37 V (min = +0.00 V, max = +4.38 V)
5V: +5.10 V (min = +0.00 V, max = +6.64 V)
12V: +11.75 V (min = +0.00 V, max = +15.94 V)
Vccp2: +2.53 V (min = +0.00 V, max = +3.59 V)
fan1: 0 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 0 RPM, div = 8)
temp: +38.5°C (high = +127°C, hyst = +127°C)
vid: +2.00 V
alarms:
I normally view the data in a gkrellm window with xfce.
A curious problem if nothing else.
Thanks.
Bob Goodwin
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
