On Sat, Sep 16, 2006 at 06:08:25PM +0200, Per-Anton Rønning wrote:
> lspci gives:
> /snip
> 02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> Gigabit Ethernet Controller (rev 13)
> \snip
> i.e. only the card configured as eth0
> No reference to realtek.
If lspci doesn't show it, the drivers won't find it. Which makes me
wonder why the drivers don't complain of not finding hardware when you
modprobe them.
Check the BIOS to be sure that the Realtec card isn't being
ignored. Some BIOSes show a list of hardware found during boot. You
may also have to go into the BIOS setup and make sure it isn't being
ignored.
Try swaping the two cards. Just a hunch and a bit of magic incantation
that sometimes works.
>
> lsmod gives:
> 8139cp 25793 0
> 8139too 29761 0
> skge 39505 0 (this is the driver for eth0)
Does the mii driver show up?
>
> this is the contents of modprobe.conf:
> alias eth0 skge
> alias scsi_hostadapter ata_piix
> alias snd-card-0 snd-intel8x0
> options snd-card-0 index=0
> options snd-intel8x0 index=0
> remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
> }; /sbin/modprobe -r --ignore-remove snd-intel8x0
> alias eth1 8139cp
>
> (I did try to alias to 8139too earlier, same result)
Should work.
--
Charles Curley /"\ ASCII Ribbon Campaign
Looking for fine software \ / Respect for open standards
and/or writing? X No HTML/RTF in email
http://www.charlescurley.com / \ No M$ Word docs in email
Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C FFF6 4C48 4ECD DFDB
Attachment:
pgpCI5pzO2pmo.pgp
Description: PGP signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
