Steven Stromer wrote:
Robert L Cochran wrote:
I noticed on the Realtek site that there is no downloadable driver
for the 2.6 kernel.
http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=1&famid=4&series=2003072&Software=True
Download the source code. Unzip the tarball.
There is a C program in the src directory that has to be corrected
before it will compile:
http://gentoo-wiki.com/HARDWARE_RTL8168
From the r1000_v1.04 directory:
su
make
depmod -a
The module will build and install correctly with no changes to any of
the Makefiles.
Probably you will find the tulip driver has been erroneously loaded. Get
rid of it:
rmmod tulip
change to the correct /lib/modules.../net directory then
insmod r1000.ko
This should get the Realtek working.
One last bit of advice -- it took me about 15 minutes of Googling to
locate the links above. That was with time to sip coffee. I got my
Realtek 8168 gigabit adapter for PCIe running as soon as I did the
insmod, and I'm using it now to send this email. Why not try Google a
little more in the future?
Bob Cochran
Steven --
The r8169 driver sounds like it might have its roots based on the 2.4
kernel. I would remove it (rmmod it) and change modprobe.conf to read
alias eth0 r1000
and reboot.
It would be useful to examine your dmesg output. I don't know how else
you have changed your network scripts. If my suggestion does not fix
your problem, send me your dmesg output as a text file attachment. You
can plug a USB flash drive in your machine and then
dmesg > /put the name of your usb drive here/dmesg.txt
I have several other things to do today, and may not be able to look
over your output till tonight, but I'll review it.
Bob
Bob,
Thank you for your help with my problem. I had changed modprobe.conf to
read 'alias eth0 r1000' when I last reported no success, so that hasn't
resolved the problem. I rmmod'ed the r8169 driver, but this seems to
remove it only until the system is rebooted. dmesg returns some
interesting output that may point us to the problem, but I am not able
to understand it fully. The pertinent part is as follows:
PCI: Found IRQ 11 for device 0000:00:0f.0
PCI: Sharing IRQ 11 with 0000:00:07.5
PCI: Sharing IRQ 11 with 0000:00:0d.2
eth0: Identified chip type is 'RTL8169S/8110S'.
eth0: r10001.04, the Linux device driver for Realtek Ethernet
Controllers at 0xc800, 00:40:f4:ee:2f:ff, IRQ 11
BUG: soft lockup detected on CPU#0!
<c043dad5> softlockup_tick+0x90/0xa1 <c0423d50>
update_process_times+0x35/0x57
<c0406134> timer_interrupt+0x60/0x98 <c043db72>
handle_IRQ_event+0x23/0x4c
<c043dc17> __do_IRQ+0x7c/0xd1 <c0405035> do_IRQ+0x63/0x80
=======================
<c04036f2> common_interrupt+0x1a/0x20 <c040d556> delay_tsc+0xb/0x13
<c04d8125> __delay+0x9/0xa <e88160bd> R1000_WRITE_GMII_REG+0x36/0x3c
[r1000]
<e8817208> r1000_init_one+0x69f/0x892 [r1000] <c053d851>
__driver_attach+0x0/0x8b
<c04dfc3b> pci_device_probe+0x36/0x57 <c053d78d>
driver_probe_device+0x45/0x9a
<c0419231> __cond_resched+0x17/0x28 <c053d8b4> __driver_attach+0x63/0x8b
<c053d21f> bus_for_each_dev+0x37/0x59 <c053d6ee> driver_attach+0x16/0x18
<c053d851> __driver_attach+0x0/0x8b <c053cf25> bus_add_driver+0x6f/0x10d
<c04dfddf> __pci_register_driver+0x5b/0x7d <c0433a69>
sys_init_module+0x134f/0x14b2
<c0423c25> __mod_timer+0x0/0x94 <c0402cb3> syscall_call+0x7/0xb
Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter
Driver version:1.04
Released date:2006/07/07
Link Status:Linked
Link Speed:1000Mbps
Duplex mode:Full-Duplex
I/O Base:0xC800(I/O port)
IRQ:11
I am trying to research possible causes of the 'BUG: soft lockup
detected on CPU#0!', but the lines here are causing me nightmares! on
the other hand, there is much more recognition of the card in the final
lines than before the switch to the r1000 driver. If you need the rest
of the dmesg output, please let me know. I tried to parsse it down to
what I thought to be the essentials.
Thanks again for your help!
Steven
An update...
This problem was occurring on a fresh install of FC5, so I decided that
it would take less time to reinstall than any other solution, as I
NEEDED this NIC working. When I reinstalled FC5 with the NIC in the
machine, it configured without a hitch. I know that this was a cop-out
to resolving the problem, but I needed to get on with my life. It also
shows that this is not a simple 'plug and play' situation, as a warning
for others who have limited experience with handling such a situation.
If you return to the beginning of this thread, I was led to believe that
having the right driver as a module available to the kernel was the only
item I would have to check on (which was evidently the case, based on
the successful reinstall), and that if this was the case, the install
would go flawlessly; three sleepless nights later, I know better. When I
get the chance, I will try to figure out what files weren't updating
properly. Thanks again for all the attempts to help me, with special
thanks to Bob Cochran!
Steven
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
