Robert L Cochran wrote:
On Mon, 2006-09-04 at 00:41 -0400, Robert L Cochran wrote:
On Sun, 2006-09-03 at 21:22 -0700, Khoa Ton wrote:
Thanks for the corrections, Bob.
Yes, the kernel is 2.6.17-1.2174. Here are the last lines on the
console at the hang (typed in manually):
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
Loading keyring
- Added public key D4AD441F6DB3F282
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
_
The last "_" represents the blinking cursor
I don't know what your problem is, and I'm not a real kernel expert --
others here are better than me. With that understanding, I checked my
own corresponding messages and ACPI processing appears after the
ioscheduler messages. Here are my kernel messages. In my case I have an
Asrock 939SLI32-eSATA2 motherboard which is using an Athlon 64 X2 4800+
processor. Here we are:
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key D4AD441F6DB3F282
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 50 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 55 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 60 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:08.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:08.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
....
....
So my guess is, you have an ACPI issue of some sort, but don't take my
word for it.
I had another thought. Are you using the very latest BIOS update for
this motherboard? My new Asrock motherboard came with the 1.00 BIOS, and
I immediately updated it to the 1.40 BIOS before even trying to boot
Fedora Core 4 which was already installed on the hard drive I put in
this system.
I also have an earlier Asrock motherboard, the Dual939-SATA2, which came
with the 1.20 BIOS and it didn't recognize my Athlon 64 X2 4400+ on that
board until I updated it to the 1.4 or 1.5 BIOS. This board is updated
to the 2.20 BIOS now.
If Asus has put an updated BIOS out on its web site, I suggest you
update to it.
Also, did you check your motherboard manual carefully to see what the
default settings for ACPI are?
You hit the nail on the head, Bob. The hang was due to some
ACPI related interaction and the new 2.6.17-1.2174 kernel. I ran with:
pci=noacpi
and the system booted! Based on Stanton Finley's writeup at:
http://stanton-finley.net/kernel-parameters.txt
the above option instructs the kernel not to use ACPI for
IRQ routing or for PCI scanning.
I don't know what the ramifications of setting this kernel parameter
are, aside from bypassing the hang...
And yes, I did update to the latest BIOS from ASUS to no avail. It
seems that this motherboard/chipset is not quite supported by FC5 yet.
I'm updating the Bugzilla report for this problem with this workaround:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=205090
Thanks again for your valuable help.
Khoa Ton
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
