On Fri, 25 Aug 2006, Chris Mohler wrote:
From: Chris Mohler <cr33dog@xxxxxxxxx>
Subject: Re: device eth1 not present?
Newsgroups: gmane.linux.redhat.fedora.general
# cat /etc/modprobe.conf
alias eth0 sis900
alias scsi_hostadapter sata_sis
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-intel8x0
alias eth1 8139too
It looks like eth0 is aliased to the SiS adapter, and eth1 to the RTL
adapter.
# dmesg | grep eth
eth0: RealTek RTL8139 at 0xde878000, 00:0d:88:37:fa:22, IRQ 177
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth1: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 185, 00:16:ec:1c:8e:11.
Here it looks like eth0 is the RTL, and eth1 is the SiS.
I'm no network guru - just thought I'd make that observation.
HTH,
Chris
Thanks, Chris. I went the win2k approach and did a fresh install (as
there was no data involved) the other night. Not the best solution, but
it seems to have fixed it.
thanks,
Thufir
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
