Roger wrote: > Has anyone had issues with Fedora Core 5 64bit version. I tried to use > it for one of my production servers and i had endless issues trying to > get it to work, first i had the segfaults caused by some of my > processes. Then the SATA drivers started giving errors and eventually my > hard drive started failing etc. I believe in Fedora and dumped FC5 for I used FC5 on x86_64 for several months completely happily. Then a couple of months ago that box killed first one SATA drive (this is on nVidia SATA driver/controller) and then after one week, its replacement SATA drive. By 'killed' I mean I came in one morning and the drive is repeatedly resetting itself on a 10-or-so second cycle, will not boot, etc. I abandoned the whole PC and moved my life into a laptop. I have three ideas what may have happened: - Power supply problem: the 12V became weak and unstable and the drive kept "powering up". Problem with believing this is that there were few devices in the box, and there had been no changes to the roster of devices in there for months - Driver problems: on a later kernel, changes in the driver cause it to try to reset the drive and there are problems with the logic that it will keep doing so until it kills the drive, perhaps because the drive firmware does not always handle soft resets properly (on a WD and a Seagate though?) - Karmic burden from a past life caught up with me and it is just random Please describe what happened with your dead drive. -Andy -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
I installed FC on my new Intel 64 bit with SATA drives and i was overwhelmed by the performance such that i decided to replace my very old mail server which had been very faithful to me, it was a sad day indeed. Then on the second day my logfile reported the following
Jul 16 10:29:57 asterix kernel: qmailadmin[13468]: segfault at 0000000000000000 rip 0000003f2a064da1 rsp 00007fffffcd37f0 error 4
Jul 16 10:30:00 asterix kernel: qmailadmin[13469]: segfault at 0000000000000000 rip 0000003f2a064da1 rsp 00007fffff9277d0 error 4
Jul 16 10:30:15 asterix kernel: ata1: handling error/timeout
Jul 16 10:30:15 asterix kernel: ata1: port reset, p_is 0 is 0 pis 0 cmd 4c017 tf 7f ss 0 se 0
Jul 16 10:30:15 asterix kernel: ata1: status=0x50 { DriveReady SeekComplete }
Jul 16 10:30:15 asterix kernel: sda: Current: sense key: No Sense
......
Jul 16 19:50:18 asterix kernel: tcpserver[13903]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13904]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13905]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13906]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: ata1: handling error/timeout
Jul 16 19:50:18 asterix kernel: ata1: port reset, p_is 0 is 0 pis 0 cmd 4c017 tf 7f ss 0 se 0
Jul 16 19:50:18 asterix kernel: ata1: status=0x50 { DriveReady SeekComplete }
Jul 16 19:50:18 asterix kernel: sda: Current: sense key: No Sense
Jul 16 19:50:18 asterix kernel: Additional sense: No additional sense information
Jul 16 19:50:18 asterix kernel: tcpserver[13907]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13908]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13909]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
Jul 16 19:50:18 asterix kernel: tcpserver[13910]: segfault at 0000000000000064 rip 00000000004049a0 rsp 00007fffffdf8a98 error 6
etc.
I reset the machine and the machine worked for 7 seven days then it stopped and gave the ata1: handling error timeout. Then 4 or days it would run and then just suddenly stop, and i was thinking that maybe it is a hard drive error. But what happens now is that the hard drive starts to just die and then i guess switches to read-only mode and i cant even use ssh to get into the machine, such that i always reset it, but when i do it just runs for 4 days max and then just dies, do you reckon it to be the hard drive that is now weak or what.
I have since replaced that server with a smaller machine running on FC3 with but uses a lot less memory and does not complain at all.
Do you reckon it could be the SATA Drivers which kill the hard drives!
Regards
Roger
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
