Phil Meyer <pmeyer@xxxxxxxxxxxxxxxx> wrote:
Chris Bradford wrote:
Hi guys,
I am trying to figure our how to setup syslog-ng on FC5 and not having
much luck. I have installed syslog-ng using yum.
I am trying to log from two HP 5308xl switches. The logging facility
on these switches is 'user' but this can be changed.
I have opened up UDP port 514 on my firewall and enables the syslog-ng
service, but I think I am missing something in the configuration.
Isn't it just a matter of editing /etc/sysconfig/syslog and adding -r to
the options?
I'm only familiar with syslog but there are typically four steps to
setting up a remote logging facility:
1) On the device that you want to have remotely log you need to tell it
about the server that will be doing the logging. This usually means
setting the host and the logging facility (numeric) to use.
2) On the server that will be doing the logging, edit syslog.conf and
add an entry that maps logging data received on the above numeric
facility to a log file. If you chose facility 5 this will look
something like:
local5.* /var/log/switch.log
3) Also on the server, you need to enable remote logging in
/etc/sysconfig/syslog. See the posting I'm responding to, above.
4) Restart the syslog service on the server.
--
Politics, n. Strife of interests masquerading as a contest of principles.
-- Ambrose Bierce
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
