On Saturday 29 July 2006 05:46, polk wrote:
>Because FC demands that CUPS be the default printing utility you will
>need to uninstall CUPS ignoring dependencies then build and install
>LPRng to use the RPM provided by Lexmark to print. I'm not sure if
>the Lexmark binaries will work with FC5, but do work with earlier
>versions. Do a google usenet groups search for lexmark z23 and fedora
>core. There also was a web page that described the installation of the
>lexmark drivers so a google serach my turn that up.
> Basically I now print any pages to .ps and use Ghostview to print
>the pages in Windows. Your only other option is look into buying a HP
>printer that will work with Linux more easily.
Or an epson if you need good color, hp's reds are still, after 10+ years,
way too orange for my taste. My old 4 color C82 is still doing excelent
color prints. And the stock epson inks for the C8x series are archival
quality according to the propaganda. That means on good paper, 100+ years
of life for the image.
>On Fri, 2006-07-21 at 21:20 -0600, Ashley M. Kirchner wrote:
>> Has anyone had any luck with the driver for this printer? If I try
>> to install it through the Control Center, I don't get very far because
>> this model isn't listed. The list only goes up to Z32... So I went to
>> Lexmark's website and they have a download for it though they say it's
>> for Linux Mandrake 7.0 (even though the previous link states RedHat.)
>>
>> I downloaded that, and ran the file. It unpacks the rpm together
>> with some install scripts then runs the installer, which installs the
>> printer at /dev/usb/lp0 (that's where the printer is located on the usb
>> bus...) However, towards the end of the installer, this error pops up:
>>
>> /var/tmp/rpm-tmp.39413: line 16: [: too many arguments while
>> executing "close $io"
>>
>> I can choose to continue or cancel the installation. Cancelling
>> will simply quit. Continuing seems to go just fine and I get the
>> cartridge alignment program. However, when I get to print anything
>> (the cartridge alignment, or the test page), another message pops up:
>>
>> Error: lpr: The printer or class was not found.
>>
>> When I look in the stack trace, I see this:
>>
>> lpr: The printer or class was not found.
>> while executing
>> "exec lpr -P$printqueue $installpath/$testpagefile"
>> invoked from within
>> ".top21.can24.can27.but37 invoke"
>> ("uplevel" body line 1)
>> invoked from within
>> "uplevel #0 [list $w invoke]"
>> (procedure "tkButtonUp" line 7)
>> invoked from within
>> "tkButtonUp .top21.can24.can27.but37
>> "
>> (command bound to event)
>>
>>
>> Now what? When I look in /proc/bus/usb/devices, the relevant part
>> says:
>>
>>
>> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh=
>> 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:
>> Vendor=043d ProdID=0021 Rev= 1.00
>> S: Manufacturer=Lexmark
>> S: Product=Inkjet color printer
>> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA
>> I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02
>> Driver=usblp E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms
>>
>>
>> So, I'm stuck. Does anyone have any suggestions on how to get this
>> printer working?
--
Cheers, Gene
People having trouble with vz bouncing email to me should add the word
'online' between the 'verizon', and the dot which bypasses vz's
stupid bounce rules. I do use spamassassin too. :-)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
