Re: Failures with cdrecord

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is old news now, sorry. I've been away running an exhibit booth for
a few weeks at a convention.

I did want to tell you that I got this problem resolved. It turned out
to be the media, after all. So, I guess not all media on the store shelf
is acceptable.

Janina

Jim Cornette writes:
> Janina Sajka wrote:
> >Hi, Jim:
> >
> >Jim Cornette writes:
> >>Janina Sajka wrote:
> >>>All of a sudden I'm finding myself unable to burn a cd rom with
> >>>cdrecord. I'm having the same problem on three different systems, each
> >>>of which is running fully updated FC5. The cdrecord on each of these
> >>>machines is cdrecord-2.01.01.0.a03-3, unchanged since March last. I'm
> >>>also quite certain that I had no problems burning back around the
> >>>beginning of May. I've tried a few different discs, and scsi, ide, usb
> >>>and firewire burners--all with the similar failures like the following:
> >>>
> >>>cmd finished after 0.001s timeout 200s
> >>>write track pad data: error after 0 bytes
> >>>BFree: 0 K BSize: 1506 K
> >>>Starting new track at sector: 0
> >>>Track 12:    0 of    6 MB written.cdrecord: Input/output error.
> >>>write_g1: scsi sendcmd: no error
> >>>CDB:  2A 00 00 00 00 00 00 00 1F 00
> >>>status: 0x2 (CHECK CONDITION)
> >>>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00
> >>>Sense Key: 0x5 Illegal Request, Segment 0
> >>>Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
> >>>Sense flags: Blk 0 (not valid)
> >>>resid: 63488
> >>>cmd finished after 0.001s timeout 200s
> >>>
> >>>write track data: error after 0 bytes
> >>>cdrecord: A write error occured. (Seamonkey mail says occurred, could 
> >>>the error message state something more than "it does not work")
> >>>cdrecord: Please properly read the error message above. (I did, but it 
> >>>was not that helpful.)
> >>>Writing  time:   11.980s
> >>>Average write speed   9.1x.
> >>>Fixating...
> >>>Fixating time:    0.003s
> >>>cdrecord: fifo had 64 puts and 1 gets.
> >>>cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> >>>
> >>>Is it me? My media? Or something in some library? I've downversioned two
> >>>kernels, but still get the same failure.
> 
> I did a search on the "Sense Key: 0x5 Illegal Request, Segment 0"
> 
> Which mentioned DAO vs. TAO mode. Maybe you could search with criteria
> 
> Excerpt below:
> and mentioned that it works okay in DAO mode but not TAO. This is 
> expected to be a transient problem as the driver catches up with the drive.
> 
> http://www.linuxtopia.org/online_books/linux_beginner_books/debian_linux_desktop_survival_guide/LG_CED_8080B.shtml
> 
> 
> >Is it possible this could be my cdr media? Why would it be trying to
> >write track 12 when I specified a .iso file (specifically boot.iso from
> >the FC5 installation media)?
> 
> This might be the problem. I never tried to grab an iso file off of the 
> CDROM itself. Are you copying the ISO file to the hard drive? It is a 
> relatively small file.
> 
> My reasoning is that the disk with the iso file is too slow in access 
> time for the writer to keep up with the reader.
> Another influencing factor might be that both the CD Recorder and the CD 
> reader are on the same controller.
> Since you mentioned using USB,IDE and other readers.
> 
> >
> >>I thought that there was another possible problem with cdrecord. I could 
> >>not find the thread.
> >>
> >Thanks for looking. I also didn't find anything when I Googled. So, I'm
> >wondering whether it's me or something bigger. Is it possible no one
> >else is using cdrecord from the cli that there haven't been complaints?
> 
> I believe there are a lot of die hard CLI users on the list. I use GUI 
> to record and let the front-end programs do the work.
> 
> I think the lack of response might be regarding that no is sure what 
> options you are giving to burn the ISO. As noted above, the message 
> referring to the error is pretty useless. Please properly read the 
> message above. I did, it only indicated what I knew and all "properly 
> reading the message" gained was a spelling error.
> 
> >Seems like it might be me, but media is aall I haven't ruled out.
> 
> I suppose that you could try burning with the same media on another 
> machine or using another OS to test.
> 
> Are you compiling a kernel with special features enabled or using a 
> stock kernel?
> 
> Anyway, there needs to be an easier interface for bugzilla which does 
> not look so horrible with text based browsers.
> 
> Jim
> 
> >
> >Janina
> 
> 
> 
> >>Jim
> >>
> 
> 
> -- 
> You can't hug a child with nuclear arms.
> 
> -- 
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

-- 

Janina Sajka				Phone: +1.240.715.1272
Partner, Capital Accessibility LLC	http://CapitalAccessibility.Com

Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://ScreenlessPhone.Com to learn more.

Chair, Accessibility Workgroup		Free Standards Group (FSG)
janina@xxxxxxxxxxxxxxxxx		http://a11y.org

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux