Andrea Bencini wrote: > I installed FC4 on HP Proliant DL380 with 3 HD scsi (raid5 hardware). > For now all ok. > Then I added HP dat 72GB scsi (ID scsi=6) (Product number Q1522B) on the > same controlle of the disk. > What do I have to do to see the dat scsi? > In directory /dev/cciss/ I have only this files: > c0d0, c0d0p1, c0d0p2, c0d0p3, c0d0p4, c0d0p5.c0d0p6,c0d0p7,c0d0p8 > If I do this command: > "cat /proc/scsi/scsi" > the answer is: > "Attached devices:" > without nothing information > Can you help me? > Andrea > You may need to run "modprobe st". In any case, it should show up as /dev/st0 and /dev/nst0. (I can not test this at the moment.) Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup! -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
