At 18:52 29/06/2006, you wrote:
Bonjour,
I try to have this scanner epson 3490 photo working under FC4.
I installed iscan from http://www.avasys.jp/english/linux_e/
sane-find-scanner gives:
<snip>
found USB scanner (vendor=0x04b8 [EPSON], product=0x0122 [EPSON
Scanner]) at libusb:001:004
</snip>
then scanimage -L:
device `snapscan:libusb:001:004' is a EPSON EPSON Scanner1 flatbed scanner
OK.
now when I run iscan, I get a small dialog box: "scanner is being
initialised" and the led on the scan blinks green slowly.
After a while, everything fails: "unable to send a command to the
scanner. Verify your scanner"
And the led on the scan blinks red....
That's all.
who can help me?
I run FC4 x86_64.
thank you.
--
François Patte
UFR de mathématiques et informatique
Université René Descartes
http://www.math-info.univ-paris5.fr/~patte
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
François,
I've got a vaguely similar problem with my Epson
Perfection 2450. See bug number 186766 for the work around I discovered.
Would it be of any use to you to try the same
work around with your system? Depends upon
whether or not you've got an old PC or USB card
available that has USB1.1 only, or a motherboard
like mine that lets you set the USB version in the BIOS.
Please let me know if you get anywhere with this,
and add to the bug report if it helps you at all.
Dave F
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
