On Sat, 2006-06-17 at 20:01 +0200, nigel henry wrote: > If you have 2 drives, jumpered as master and slaves, the master drive > is connected to the middle connector on the ribbon cable, and the > slave drive uses the connector at the end of the ribbon. *IF* you are using cable-select cables, where the position of the drive selects which is master and slave (and you have the drive jumpered to work in cable-select mode), the end connector is the master. If you have manually set your drives as master and slave, then it does not matter where you have it connected. Anybody who thinks otherwise is falling victim to the placebo effect. -- (Currently running FC4, occasionally trying FC5.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
